OMRON D4JL-2NFA-C7-20 INSTRUCTION sheet PDF

Release key type: Special release key.
Indicator: Orange.
Lock and release types: Mechanical lock Solenoid release.
Contact configuration(door open/closed detection switch,
and lock monitor switch contacts): 2NC/1NO+3NC D4JL-2NFA-C7-20 PDF.
Conduit opening: M20.
Holding Force of 3,000 N.
Two safety circuits and two monitor contacts provide an,
array of monitoring patterns.
Standard gold-clad contacts enable use with ordinary loads,
and microloads D4JL-2NFA-C7-20
Models with trapped keys prevent workers from being locked,
in hazardous work areas.
Models with rear release buttons allow people to unlock the,
Switch and escape if they arre locked into hazardous areas D4JL-2NFA-C7-20 PDF D4JL-2NFA-C7-20 Manual.
IP67 degree of protection. Lock method: Mechanical lock.
Conduit size: G1/2.
Voltage for solenoid: 24 VDC.
With LED indicator 2NC+ 2NC (Slow-action).
Release Protective Cover Locks Using.
Controller Signals or Pushbutton.
Switches after the Cutting Tool Stops D4JL-2NFA-C7-20 PDF.
Moving Due to Inertia.
A mechanical lock is applied automatically when the Operation.
Key is inserted. A high level of safety is achieved using a,
mechanism where the lock is only released when voltage is,
applied to the solenoid.
Conforms to EN (TÜV) standards corresponding to the CE marking OMRON INSTRUCTION sheet.
Certified by UL, CSA and CCC standards.
The Switch contact is opened by a direct opening mechanism,
(NC contacts only) when the protective cover is opened.
Direct opening mechanism that is EN-certified is indicated by,
on the Switch.
Auxiliary release key ensures easy maintenance and unlocks the,
door in the case of a power failure OMRON INSTRUCTION sheet.
Tough aluminum die-cast body incorporating a switch box with,
degree of protection satisffying IP67, UL, and CSA TYPE6P, 13 D4JL-2NFA-C7-20 INSTRUCTION sheet.
Equipped with a horizontal and vertical conduit opening.
Models incorporating easy-to-see indicators for monitoring and,
those using an adjustable Operation Key for a swinging door are avvailable OMRON INSTRUCTION sheet D4JL-2NFA-C7-20 Manual.
The mounting direction of the head can be changed,
to allow the Operation Key to be inserted from four directions.