OMRON E2E-XF INSTRUCTION sheet PDF

Appearance: Close mounting.
Sensing method: Throughbeam type(with slot).
Connecting method: Connector(4 poles).
Sensing distance: 5 mm (slot width) E2E-XF PDF.
Output configuration: Light-ON.
Indicator mode: Incident light.
Model: NPN output.
Global Standard Slot-type.
photomicrosensors with 50- to,
100-mA direct switching capacity.
Series includes models that enable switching between,
dark-ON and light-ON operation E2E-XF
Response frequency as high as 1 kHz.
Easy operation monitoring with bright light indicator.
Wide operating voltage range: 5 to 24 VDC.
Models in which the light indicator turns ON for dark-ON,
operation are also available E2E-XF PDF.
A wwide range of variations in eight different shapes E2E-XF Manual.
Flexible robot cable is provided as a standard feature. Name: Temperature Controller (See note 1.).
Power supply: 24 VDC.
No. of control points: 2.
Control output: Analog output (current output) (See note 2 E2E-XF PDF. ).
Auxiliary output: Transistor output: 2 pts (sourcing).
Functions: Transfer output (linear voltage output)(See note 2.), Heating or heat/cool,
control is selectable (See note 4.)Event input: 1 point per Unit.
Communications functions: RS-485.
Input type (See note 5.): Platinum resistance thermometer OMRON INSTRUCTION sheet.
New DIN Track Mounting Temperature.
Controller.
Two channels of temperature control available despite width of,
only 22.5 mm.
The Temperature Controller itself can be replaced without,
changing terminal wiring.
Use in combination with a compact Setting Display Unit to,
reduce communications programming requirements OMRON INSTRUCTION sheet.
Front-panel LED indicators for easy operation monitoring.
Power supply and communications wiring not required between,
Units when mounted side-by-side.
CCompoWay/F communications protocol supported E2E-XF INSTRUCTION sheet.
UL, CSA, and CE Marking compliance. E32-M21 type: special beam type; region detection,
Specialty: multi point detection (4 probe),
Shape / detection distance (mm): 750; 610; 350 (140),
Bennding radius (mm): R25 OMRON INSTRUCTION sheet E2E-XF Manual.
Standard test object (minimum test object) (mm) 1: 2 (0.1),
Fiber element for meeting diversified needs