OMRON E5AN-Q3HL-N INSTRUCTION Manual PDF

Name: Special Reflector for E3ZM-B.
Directional angle: 30° min.
Ambient operating temperature range: -40 to 60°C.
Ambient storage temperature range: -40 to 70°C E5AN-Q3HL-N PDF.
Ambient operating humidity range: 35% to 85%.
Ambient storage humidity range: 35% to 95%.
Degree of protection: IEC IP67.
Accessories: --. Size: M12 (Brass); Double; Unshielded.
Sensing distance: 16 mm.
Connecting method (See note 1 E5AN-Q3HL-N): M12 Connector.
Body length: Short.
Output configuration: NPN.
Operation mode NO.
A new generation in global applications. Sensing method: Narrow-beam reflective.
Connection method: Connector (M8, 4pins) E5AN-Q3HL-N PDF.
Sensing distance: 90±30 mm.
Model: PNP output.
Small 2.5-mm-diameter Spot Ideal for.
Detecting Small Workpieces.
Tiny workpieces as little as 0.1 mm in diameter can be,
detected with the 2.5-mm-dia. spot.
The narrow beam enables sensing from small slots or holes.
The small spot of light enables visual checking of sensing,
spot position E5AN-Q3HL-N PDF.
IP67 degree of protection, mutual interference prevention,
and EN standard compliance. Size: 48 x 96mm.
Category: power AC100 ~ 240V with.
Shell color: black.
Control output 1: position ratio with relay output E5AN-Q3HL-N Manual.
Control output 2: position ratio with relay output OMRON INSTRUCTION Manual.
Control mode: standard or heating cooling.
Auxiliary output points: 2 points.
Heater break, SSR fault detection function: single phase or three phase heater detection function.
Event entry point: 2.
Transfer output: transfer output (special terminal).
Remote SP:4 to 20mA input OMRON INSTRUCTION Manual.
Communication: RS-232C.
New program type.
A new type of liquid crystal with high performance cost ratio is adopted in the 256 paragraph,
Visual angle, contrast can be improved.
Can be set up to 8 procedures (mode) x 32 (step) procedure.
High resolution 5 bit display / can display 0 OMRON INSTRUCTION Manual. 01 degrees C.
High speed sampling period 60ms.
All models complete a variety of (to the thermocouple /Pt/ analog input switching), 1 machines to support a variety of sensors.
Also supports remote SP.
Add PV/SV state display function, to see the state of the thermostat
(automatic / manual, RUN/RESET, alarm), interactive display PV/SV.
Through the support software (Ver.4.3 CX-Thermo) makes the process of setting management becomes very
Simple use of simple computing functions (AND/OR logic and delay) to set the implementation of flexible contact output E5AN-Q3HL-N INSTRUCTION Manual.
Through the infrared port can be carried out from the frront of the communication E5AN-Q3HL-N Manual.
The control output ON/OFF times counting function can predict the fault of the internal relay of the temperature controller.