OMRON H5S-YFA4-X datasheet PDF

Type: H5CX-B series.
Time specifications: 0.01 to 9999.99 s, 1 s to 99 h 59 min 59 s,
0.1 to 99999.9 min, 0.1 to 99999.9 h.
Operating modes: A: Signal ON Delay I, F-1: Cumulative.
External connections: Screw terminals.
Input: Signal, Reset, Gate (NPN/PNP input).
Output: Transistor output (DPST) H5S-YFA4-X PDF.
Supply voltage: 12 to 24 VDC.
The Timer with the Shortest Body,
in the Industry H5S-YFA4-X Outputs: Time-limit contact and instantaneous contact .
Supply voltage: 110 VAC (50/60 Hz); 220 VAC (50/60 Hz).
A wide star-time range (up to 120 seconds) and star-delta,
transfer time range (up to 1.0 seconds).
Setting rings (order separately) to enable consistent settings,
and to limit the setting range H5S-YFA4-X PDF.
Panel Covers (order separately) to enable various panel designs.
Approved by UL, CSA, CE and CCC. Operating method: Reversible (selectable with rotary DIP switch) between,
0 and the set value; Incrementing/decrementing A/D (command inputs);
Incrementing/decrementing B/E (individual inputs);
Incrementing/decrementing C/F (phase difference inputs).
Mounting method: Flush mounting.
Operation modes: N, F, C, R, K, P, Q (selectable with rotary DIP switch) H5S-YFA4-X PDF.
Input signal method (Count and reset inputs): Contact and transistor input, voltage (H and L).
Control output: 1-stage counters: Contact (SPDT) and transistor,
output (H and L output switchable);
2-stage counters: Contact (SPST-NO) and transistor output,
(H and L output switchable).
Set value read: Continuous mode.
Memory backup: No .
Display: Yes (10-mm high 7-segment LED, Up indicator).
Models: 4 digits; 2 stages.
A DIN 72 x 72 mm Best-selling Counter.
Easy setting with thumbwheel switches.
A draw-out construction enables maintenance without rewiring.
Models with 2-, 4-, 6-, or 8-digit displays are also available.
Total Counter models are also Available.
Complies with UL and CSA Marking. Supply voltage: 12 VDC.
Control output: Contact output, SSPDT (time-limit SPDT) H5S-YFA4-X datasheet.
Eight-mode Timer.
Multiple time ranges and operating modes let you cover a wide,
range of applications.
The time-limit DPDT output contacts can be changed to time-limit,
SPDT and instantaneous SPDT ooutput contacts using a switch H5S-YFA4-X datasheet.
Sequence checks are easily performed by setting an instanta,
neous output to 0.
Start signal control for the H3DK-M.