LK166
Home >> Download >> OMRON >> Manual Download >> OMRON GX-OD3228 PROGRAMMING MANUAL PDF

OMRON GX-OD3228 PROGRAMMING MANUAL PDF

Brand: OMRON
Product model: GX-OD3228
Name: Analog I/O Units
Sort: PROGRAMMING MANUAL
File language: English
File size: 9.25MB
MITSUBISHI motor produced PLC connection cable.
Size: A, 1500mm; B, 1250mm.
Input use.
Cable and loose wire cable with loose wire pressing connecting terminal,
Connector cable, MITSUBISHI motor produced PLC connection cable GX-OD3228 PDF. Control terminal block: Terminal block with small slotted screws.
Type: Standard.
Capacity: 45 A, 100 to 240 VAC.
Heater burnout detection: No.
Communications: No GX-OD3228
High-precision Control with Easy Setup,
Precise heater burnout detection.
Set value and present value monitoring with indicators.
Phase control or optimum cycle control.
RS-485 communications to set manipulated variables and,
monitor load current GX-OD3228 PDF.
Total run time monitoring.
Output modes for phase control: proportional to phase angle,
proportional to voltage, proportional to square voltage,
and constant-current control.
Application with various loads: constant load resistance,
variable load resistance GX-OD3228 PDF.
UL, and IEC/EN (TÜV) certified. Terminal (wire connection): Push-In Plus Terminal.
Applicable output load: AC load.
Zero cross function: Yes.
Rated input voltage: AC 110V GX-OD3228 Manual.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel OMRON PROGRAMMING MANUAL.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals OMRON PROGRAMMING MANUAL. ).
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires.
Screw terminal is also stocked to meet the screw type needs.
Mounted relay or solid-state relay has a plug-in terminal OMRON PROGRAMMING MANUAL.
that is difficult to bend at the time of exchange. Mounting type: W-bracket(see note).
Contact form: 4PST-NO.
Screw terminals.
A High-capacity, High-dielectric-strength,
Multi-pole Relay Used Like a Contactor.
Miniature hinge for maximum switching power ffor motor loads,
as well as resistive and inductive loads GX-OD3228 PROGRAMMING MANUAL.
No contact chattering for momentary voltage drops up to 50%,
of rated voltage.
Withstanding more than 4 kV between contacts that are differ,
ent in polarity and betweenn the coil and contacts GX-OD3228 Manual.
Flame-resistant materials (UL94V-0-qualifying) used for all in,
sulation material.
Standard models approved by UL and CSA.
Related products
OMRON
Digital I/O Terminal 3-tier Terminal Block Type
GX-MD3228
OMRON Digital I/O Terminal 3-tier Terminal Block Type GX-MD3228
Internal I/O common: PNP. I/O indicators: LE
OMRON
Digital I/O Terminal 3-tier Terminal Block Type
GX-OD1622
OMRON Digital I/O Terminal 3-tier Terminal Block Type GX-OD1622
Input capacity: 16 points. Rated current ON
OMRON
EtherCAT Remote I/O Terminals
GX-OD1621
OMRON EtherCAT Remote I/O Terminals GX-OD1621
Input capacity: 16 points. Rated current ON
OMRON
EtherCAT Remote I/O Terminals
GX-OC1601
OMRON EtherCAT Remote I/O Terminals GX-OC1601
Input capacity: 16 points. Mounted relays: N