Proface CA3-ADPTRM-01 User's Manual PDF

The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface CA3-ADPTRM-01 PDF. COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)Touch panel operation for RGB input modules (Master - from: Mini-B)10 CA3-ADPTRM-014 inches and above, used to connect the power cord (5 / set) CA3-ADPTRM-011 PDF CA3-ADPTRM-01 Manual. COM2 adapter for converting the COM2 interface to the RS-422 terminal blockExpansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationCOM1 interface with the cable for direct connection to the CPU series PLC AA connector that connects the DIO interface for connecting an external I/O device (5 sets) CA3-ADPTRM-01 PDF. Suitable for A/B+ Type models10.4 inches (TFT), the replacement of the host backlight (1).Slave station module for connecting support for CANopenExpansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master stationCOM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connectorUsed to convert RGB to DVI-ACOM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)Engineering documents created by the LT interface to download images and logic programming software through the USB interface Proface User's Manual Proface User's Manual. Extended cable for connecting USB (Type-A) (LT) intterface CA3-ADPTRM-01 User's Manual. Adapter for EX module (5 / set)10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function Proface User's Manual. COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionFor 3 CA3-ADPTRM-01 Manual. 8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)