CA3-ADPCOM-01 Proface CA3-ADPCOM-01

COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block Proface CA3-ADPCOM-01 CA3-ADPCOM-01 Portable GP2000H series models accessories, RS-422 single head cable (10 m).For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.For 5.7 inch models, connect the connector to the DIO interface Proface CA3-ADPCOM-01. For connecting external I/O devices. (5 / set)Used to prevent disconnection. (1 interface, 5 / set)Touch screen anti ultraviolet protective film (1 pieces).Durable interface cable for connecting GP with external devices (such as the main controller), equipped with a universal filter.7.5 inches, GP installed to the hard panel to provide dust and moisture proof function.12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function Proface CA3-ADPCOM-01. 7.5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets).Used to display analog RGB (2 channels) on the GP3000The host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication.A connector that connects the DIO interface for connecting an external I/O device (5 sets).3.4 Inch Touch Screen anti UV protective film (1 pieces).Touch screen anti ultraviolet protective film (1 pieces).(serial communication terminal adapter is included in the product package)Appplicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) CA3-ADPCOM-01. Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceCOM2 interface with the cable (RS-422), used to connect the 2-Port addapter to the man-machine interfaceWhen the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function CA3-ADPCOM-01. (1)