SIEMENS serial adapter CA3-ADPSEI-01 Proface CA3-ADPSEI-01

A1/A2/B+ DIO Type connector (welding type) (5 / set)5.7 inches, installed to provide the function of dust and moistureSuitable for LT4000M/GP4000M series modules, 5.7 inch. A veneer, for the GP4000 series back loading models of full flush (white, 1)15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1) Proface CA3-ADPSEI-01. Note: joints A and B are different, the joints C and D different CA3-ADPSEI-01Used to install the human machine interface to the fixed panel (2 / cover).Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).10.4 inches (TFT), the replacement of the host backlight (1).Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine Proface CA3-ADPSEI-01. 15 inches, replaced by a host of backlight (1).Standard cable for connecting GP3000H adapter and GP3000H.
Length: 3 meters. GP4000 series back mounted model of waterproof rubber gasket. (1)I/O expansion module, including the 8 point relay /1 public endApplicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Touch screen anti ultraviolet protective film (1 pieces).Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter Proface CA3-ADPSEI-01.
Length of 5 meters. 10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10 CA3-ADPSEI-01 Proface. 4 inch GP2500 (TFT) in the installation of the required accessories.1-0 DVI standard (DVI-D 24 pin convex connector)7.0/7.5 inch screen protective cover (1 pieces)Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors CA3-ADPSEI-01 Proface.
Length: 10 meters. Standard cable for connecting GP3000H adapter and GP3000H.
Length: 5 meters. Portable GP2000H series models accessories, RS-232 single head cable (110 m) CA3-ADPSEI-01. COM2 terminal adapter for communication through the RS-422/485 connectionUsed to connect the 2-Port adapter to GP4000When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function CA3-ADPSEI-01 Proface Proface CA3-ADPSEI-01. (1)With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models. (2 / set)