Proface GP2000H-STRAP11

Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters. Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.A veneer, for the GP4000 series back loading models of full flush (white, 1)Input voltage: DC24V .
Screen size: 10.4 inches.
Display type (resolution):65536 color TFT display LCD (VGA 640 x 480 pixels) GP2000H-STRAP11
Touch panel type: analog resistance.
Memory: 32MB (internal memory), SRAM320KB (backup memory), SRAM64KB (variable area).
Ethernet interface: 1.
Serial port: RS-232C * 1, RS-422/485 * 1.
SD card slot (max 32GB):1.
USB interface: Type-A x (2) USB 1, Mini-B USB (2) x 1 GP2000H-STRAP11.
Replaceable battery: yes .
Alarm analysis function block: yes.
Panel opening size:
Wide 259 x high 201mm (+1/0mm)
Panel thickness: 1.6-5mm, chamfer radius is less than R3.
Back mounted model: there.
Enhance the display effect.
Meet a number of standards to support a wide range of applications
The coating components are widely used in various working environments, and are in line with the international standards GP2000H-STRAP11.
Remote data acquisition and management .
Human machine interface, which is installed on the production machine,
With EX Microsoft software combined with Office Pro-Server and SQL and other standard PC software,
Can be simple and economical to establish a set of data management system, and effectively improve the quality of production and efficiency. Size: 3.8 inches.
Display type: monochrome (amber / red) LCD.
Resolution: 320 x 240 pixels (QVGA).
Display color: monochrome (8 gray level).
Power supply: DC24V.
Interface: USB (host), RS-232C, RS-422/485.
Backlight: amber / red LED (users can not change their own. Must be replaced by the manufacturer. ).
Brightness adjustment: 16 level adjustment can be carried out by touch panel.
According to ID number of easy access to the operation log, through the analysis of the operation to improve production efficiency.
Use ID based on the number of authorized mode of operation, can be recorded when, who performed the operation.
Using this data, you can analyze the causes of all the faults that have occurred.
You can easily and intuitively set the address by dragging and dropping the mouse.
In addition, click on the use of the address can be displayed on the screen number and part number.
Click the part number to jump to the screen using the widget.
The same software supports all 3000 series of Pro-face man-machine interface.
From the screen to create the programming, the functions are simple and easy to use.
Learn a software, master all the skills.
Support efficient image creation.
ID management and operation log reduces downtime.
Improve the operation mode, reduce the cost and workload.
Analysis of failure causes according to the operation log.
Check register status on historical trend chart.
Drag and drop functionality makes the software interface easier to operate.
A variety of components to provide a variety of components, easy to create a beautiful picture.
In addition, there are a variety of 256 color components can be used.
Using the alarm log to quuickly check and dispplay the alarm message and register value, it is easier to find the cause of the fault GP2000H-STRAP11.
Register value will be recorded when the alarm is issued.
Therefore, the state of the register and its value can be obtained while acquiring the alarm message.

A comparison of the data is helpful to find the cause of the fault GP2000H-STRAP11.
These sample parts" can be used directly, and the design time is greatly reduced. "
GP2000H-STRAP11 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=GP2000H-STRAP11&select=5