GP2000H-D422-3M | Proface RS-422 cable with D-Sub connector GP2000H-D422-3M

When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)Used to install the human machine interface to the fixed panel (2 / cover).The main controller is connected to the man-machine interface of the host, for MPI communicationTransmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)Connector for connecting DC power cord (5 / set) Proface GP2000H-D422-3M GP2000H-D422-3M Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interface5.7 inches, replace the backlight (1 / set)12.1 inches, replace the backlight (1 / set)B/B+/C FLEX NETWORK Type connector (5)10.4 inches (TFT), the replacement of the host backlight (1) Proface GP2000H-D422-3M. COM1 interface with the cable for direct connection to the CPU series PLC AGP2500S use1-0 DVI standard (DVI-D 24 pin convex connector)A veneer, for the GP4000 series back loading models of full flush (white, 1)12.1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)Suitable for LT4000M/GP4000M series modules, 3 Proface GP2000H-D422-3M. 5 inch.3 / setsColorful LED switch with USB interface.7.5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets) GP2000H-D422-3M Proface. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function GP2000H-D422-3M Proface. (1)3.4 Inch Touch Screen anti UV protective film (1 pieces).For multi connection communication, length: 5 meters.7.5 inches, GP installed to the hard panel to provide dust and moisture proof function.Used to install the man-machine interface to the fixed panel. (4 / set)LT fasteners installed on the control panel (4 / set)10 GP20000H-D422-3M Proface GP2000H-D422-3M. 4 inches or larger, when installed to provide the function of dust and moistureCOM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)COM1 pin adappter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface Proface GP2000H-D422-3M.