Brand sort
MITSUBISHI A6BSW-P-S5
Brand:
MITSUBISHI
Country: JAPAN
Name: Optical media conversion
Model: A6BSW-P-S5
Market price: U.S.$ 4920.34
(The following are the market open price not sales price!)
(The following are the market open price not sales price!)
next one: 
Last one: MITSUBISHI A6BSW-P-S5
A pack of 10.
Applicable models:
AJ65VBTCE - -8 - type.
AJ65VBTCE - -16 - type. Adapter for Q2MEM memory card with standard PCMCIA interface.Motor series: low inertia, medium capacity.
Rated output power: 37.0kw.
Rated speed: 1000rpm.
With the brake: without.
Voltage: 400V level.
Shaft end: straight shaft .
The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the target value, the driver adjusts the rotation angle of the rotor A6BSW-P-S5
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines) A6BSW-P-S5. MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 11.0kw.
Interface type: CC-Link communication type (built-in positioning function).
Power specification: three phase AC400V.
Positioning operation by setting position and rotational speed data in the positioning table and receiving the start signal from the main controller A6BSW-P-S5.
The setting of the position and speed of the positioning table, as well as the start and stop operation can be completed through CC-Link communication .
By using the MR-J3-D01 extension IO unit, the DI/O instruction can be used to select and locate the table.
(CC-Link can not be used for MR-J3-D01 communications).
With built-in positioning function of the servo amplifier, can be set through the CC-Link communications and speed data. (corresponding to the CC-Link version: Ver.1.10)
Can be achieved through the CC-Link communicatiions to start, stop and moonitoring and other operations A6BSW-P-S5.
Serial communication reduce wiring.
Distributed servo control system can be built by CC-Link communication.
The parameters of unit MR-PRU03 (optional) the parameter setting, operation and monitoring more convenient.
Thhe servo amplifier can be used for speed control operation A6BSW-P-S5.
When the two stations are occupied, the speed can be set directly by the remote register.
A6BSW-P-S5 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=A6BSW-P-S5&select=5
Applicable models:
AJ65VBTCE - -8 - type.
AJ65VBTCE - -16 - type. Adapter for Q2MEM memory card with standard PCMCIA interface.Motor series: low inertia, medium capacity.
Rated output power: 37.0kw.
Rated speed: 1000rpm.
With the brake: without.
Voltage: 400V level.
Shaft end: straight shaft .
The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the target value, the driver adjusts the rotation angle of the rotor A6BSW-P-S5
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines) A6BSW-P-S5. MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 11.0kw.
Interface type: CC-Link communication type (built-in positioning function).
Power specification: three phase AC400V.
Positioning operation by setting position and rotational speed data in the positioning table and receiving the start signal from the main controller A6BSW-P-S5.
The setting of the position and speed of the positioning table, as well as the start and stop operation can be completed through CC-Link communication .
By using the MR-J3-D01 extension IO unit, the DI/O instruction can be used to select and locate the table.
(CC-Link can not be used for MR-J3-D01 communications).
With built-in positioning function of the servo amplifier, can be set through the CC-Link communications and speed data. (corresponding to the CC-Link version: Ver.1.10)
Can be achieved through the CC-Link communicatiions to start, stop and moonitoring and other operations A6BSW-P-S5.
Serial communication reduce wiring.
Distributed servo control system can be built by CC-Link communication.
The parameters of unit MR-PRU03 (optional) the parameter setting, operation and monitoring more convenient.
Thhe servo amplifier can be used for speed control operation A6BSW-P-S5.
When the two stations are occupied, the speed can be set directly by the remote register.
A6BSW-P-S5 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=A6BSW-P-S5&select=5
...more relevant model market price >>>>
Related products
MITSUBISHI
Optical media conversion
A6BSW-P-S7
Self service IN, OUT: SI optical cale
MITSUBISHI
Optical media conversion
A6BSW-P-S5
Self service IN, OUT: SI optical cale
MITSUBISHI
bypass switch
A6BSW-R
Coaxial data link anomaly station.
Exten
MITSUBISHI
Optical media conversion
A6BSW-P-S6
Self service IN, OUT: SI optical cale