OMRON ZEN-10C2AR-A

Size: 1/8 DIN 48 × 96 × 78(W × H × D).
Power supply voltage: 100 to 240 VAC.
Input type: Thermocouple or Resistance thermometer.
Alarm output: 3.
Control output: Relay output.
Functions: Heater burnout, No; Mounting option units, No.
Previous model: E5EZ-R3 E5EZ-A3 + E53-AZR.
These Best-selling General,
purpose Temperature Controllers,
Are Now Even Better ZEN-10C2AR-A.
Controllers now available with analog inputs ZEN-10C2AR-A
Faster sampling at 250 ms.
Transfer output provided for easy output to recorders.
Models available with a loop break alarm (LBA) and,
heater short alarm (HS alarm).
Manual output provided.
Easy setting with 11-segment displays.
New protocol called Modbus is installed in the,
models with communications ZEN-10C2AR-A.
USB-Serial conversion cable is available.
Note: Refer to Precautions on page 33. Optical system: Regular reflective.
Beam shape: Spot beam.
Sensing distance: 48±5mm.
Resolution: 1.5µm.
Stable, Easy & Affordable.
New Regular-reflective Sensor Head.
Designed for Optimal Wafer Measurement. Ratings: Standard load; 0.1 A at 125 VAC, 0 ZEN-10C2AR-A. 1 A at 30 VDC.
Cable: VCTF cable *2 .
Actuator: Pin plunger.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Contact type: Standard load (250 VAC, 2 A; 125 VDC 0.4 A).
Operaation: Alternate operatiion (Self-holding) ZEN-10C2AR-A.
Output: SPDT.
Lighting: LED, 5 VDC.
Operation Unit color symbol: Enter the desired color symbol for the Pushbutton
n @. R (Red); Y (Yellow); G (Green); A (Blue); W (White).
Pushbutton Switch Series with.
Square 40-mm Body.
CCombines miniature design with distinct but soft sense of operation ZEN-10C2AR-A.
Easy panel mounting from the front and simple lamp replacement.
without tools.
ZEN-10C2AR-A Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=ZEN-10C2AR-A&select=5