Home
>> Products
>> MITSUBISHI
>> Touch Screen
>> Touch screen accessories
>> GOT-A900 touch screen accessories
>> A8GT-C50NB A bus connecting cable MITSUBISHI A8GT-C50NB
A8GT-C50NB A bus connecting cable MITSUBISHI A8GT-C50NB
Brand:
MITSUBISHI
Name: A bus connecting cable
Model: A8GT-C50NB
Cable length: 5 meters.
Long distance CPU extension cable.
For QnA/ACPU/ motion control and GOT connection.
...More relevant models >>>>
Name: A bus connecting cable
Model: A8GT-C50NB
Cable length: 5 meters.
Long distance CPU extension cable.
For QnA/ACPU/ motion control and GOT connection.
RS-422 connection (QnA/A/FXCPU direct connection, computer connection, micro computer connection).
No clock function.
Applicable models: A985 (-V) /975/970/960GOT. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 5.7 inches.
Display color: 256 color or more color MITSUBISHI A8GT-C50NB.
Mounting type: panel mounting type.
Resolution: QVGA (320 x 240) A8GT-C50NB
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port MITSUBISHI A8GT-C50NB.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system MITSUBISHI A8GT-C50NB.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly A8GT-C50NB MITSUBISHI. 10 A8GT-C50NB MITSUBISHI. 4 inches.
Surface treatment: anti reflective film.
Protective film color: No.
USB protection cover parts: there is an opening.
Set number: 5.
Applicable models: GT27, GT25. A set of 55 (LOGO removable, man-machine interface provides one) A8GT-C50NB.
Applicable model: A95_GOT (-M3). Connecting cable for handheld GOT and PLC A8GT-C50NB MITSUBISHI.
Cable length: 3 meters.
Application: RS-422 connection and RS-232C conneection MITSUBISHI A8GT-C50NB. 15 inches /10.4 inch /8.4 inch /12.1 inch with.
GOT front USB interface with protective cover (for replacement).
Applicable models: GT27, GT25.
No clock function.
Applicable models: A985 (-V) /975/970/960GOT. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 5.7 inches.
Display color: 256 color or more color MITSUBISHI A8GT-C50NB.
Mounting type: panel mounting type.
Resolution: QVGA (320 x 240) A8GT-C50NB
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port MITSUBISHI A8GT-C50NB.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system MITSUBISHI A8GT-C50NB.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly A8GT-C50NB MITSUBISHI. 10 A8GT-C50NB MITSUBISHI. 4 inches.
Surface treatment: anti reflective film.
Protective film color: No.
USB protection cover parts: there is an opening.
Set number: 5.
Applicable models: GT27, GT25. A set of 55 (LOGO removable, man-machine interface provides one) A8GT-C50NB.
Applicable model: A95_GOT (-M3). Connecting cable for handheld GOT and PLC A8GT-C50NB MITSUBISHI.
Cable length: 3 meters.
Application: RS-422 connection and RS-232C conneection MITSUBISHI A8GT-C50NB. 15 inches /10.4 inch /8.4 inch /12.1 inch with.
GOT front USB interface with protective cover (for replacement).
Applicable models: GT27, GT25.
...More relevant models >>>>
Last one: MITSUBISHI A bus connecting cable A8GT-C30NB
next one: MITSUBISHI Small CPU long distance connecting cable A8GT-C100EXSS-1
Related download