Home
>> Products
>> OMRON
>> C200HE/C200HW/C200HG/C200HX/C200H PLC
>> C200HW-PA/PD and C200H-PS power supply
>> C200HW-PD106R Power Supply Module OMRON C200HW-PD106R
C200HW-PD106R Power Supply Module OMRON C200HW-PD106R
Brand:
OMRON
Name: Power Supply Module
Model: C200HW-PD106R
Power supply voltage: DC100V.
Note: operation with output contacts.
Power supply unit.
The power supply of the CPU rack is supplied by the power supply unit.
The following power units are available for selection.
C200HW-PA204 (voltage: AC100-120V/AC200-240V)
C200HW-PA204S (voltage: AC100-120V/AC200-240V)
C200HW-PA204R (voltage: AC100-120V/AC200-240V)
C200HW-PD024 (voltage: DC24V)
In the past, PC connected to a measurement equipment or components must be given to the ASCII unit or BASIC unit to write a communication program.
Now, PC C200HX/HG/HE is installed on the communication protocol macro function,
Can be configured to these communications procedures through the PMCR instruction to the ladder program,
With this function system can be easily connected with a wide range of components.
...More relevant models >>>>
Name: Power Supply Module
Model: C200HW-PD106R
Power supply voltage: DC100V.
Note: operation with output contacts.
Power supply unit.
The power supply of the CPU rack is supplied by the power supply unit.
The following power units are available for selection.
C200HW-PA204 (voltage: AC100-120V/AC200-240V)
C200HW-PA204S (voltage: AC100-120V/AC200-240V)
C200HW-PA204R (voltage: AC100-120V/AC200-240V)
C200HW-PD024 (voltage: DC24V)
In the past, PC connected to a measurement equipment or components must be given to the ASCII unit or BASIC unit to write a communication program.
Now, PC C200HX/HG/HE is installed on the communication protocol macro function,
Can be configured to these communications procedures through the PMCR instruction to the ladder program,
With this function system can be easily connected with a wide range of components.
C200H Discrete I/O Data Access Console C200H-DAC01Model: C200H-OD216.
No. of points: 8 pts.
Specifications: 0.8 A, 24 VDC. source type (PNP). with load short protection.C200H A Backplane I/O Mounting Bracket For 3 Slots C200H-ATT33.General Information
The C200HS-SLK12 SYSMAC LINK fiber-optic module connects the PLC to the SYSMAC
LINK fiber-optic token bus peer-to-peer communications network OMRON C200HW-PD106R C200HW-PD106R An external power supply option provides direct pass-through communications in case of modulModel: C200H-MD215.
No. of I/O pts: 16 inputs, 16 outputs.
Specifications: 24VDC.Model: C200HW-BI051.
No. of I/O slots: 5 slots.Model: C200H-ME432.
Description: EEPROM, 4K words, battery back-up.with clock(CPU21, CPU23 only) OMRON C200HW-PD106R. Model: C200H-IA122V.
No. of inputs: 16 pts.
Input voltage: 100 to 120 VAC, +10%/–15%.
Input current: 10mA, 100VAC.
Isolation: Photo-coupler.
Indica-tor: LED.
External connec-tions: Remove-able termi-nal blocks.
Inputs percom-mon: 16 pts.
Internal currentcon-sump-tiC200HW Backplane PLATE ALPHA CPU ADAPTOR C200HW-AB001Name: SYSMAC LINK Fiber-optic Power Supply.
Model: C200H-APS01.Model: C200H-ID215 OMRON C200HW-PD106R.
No. of inputs: 32 pts.
Specifications: 24VDC.Model: C200H-B7A21.
I/O points: 16 output points and 16 input points or 15 input points + 1 error
input.
Weight: 300g max.Model: C200H-AD003.
Input points: 8 C200HW-PD106R OMRON.
Voltage input: 1 to 5 V, 0 to 10 V, or –10 to 10 V.
Current input: 4 to 20 mA.Model: C200H-OD411.
No. of points: 8 pts.
Specifications: 1A, 12 to 48 VDC.UM: 31 C200HW-PD106R OMRON. 2K words.
DM: 6K words.
EM: 6Kx3 banks(18K) words.
Instruction processing time (basic instructions): 0.1 µ.s min.
No. of I/O points: 1, 184 points.
Max. no.of con-necting Expansion I/O Racks: 3 Racks.
Max. no. of connecting High-density I/O Units(i.e., Group-2): Unavailable.
Max. no. of con-necting Special I/O Units: 10 C200HW-PD106R OMRON.
RS-232C: NO.Name: PID Control Module.
Moddel: C200H-PID01 C200HW-PD106R.
Output: Transistor output (open collector).Capacity: 16K word.
Access time: 150ns.
When using SYSMAC-CPT, can not be written in EPROM.
To write a program to the EPROM, use the standard PROM writer.
Before the EPPPROM memory card into the CPU, to connect the EPROM to the EPROM memory card OMRON C200HW-PD106R.
If you remove the EPROM memory card from the CPU,
Will not lose its data.
No. of points: 8 pts.
Specifications: 0.8 A, 24 VDC. source type (PNP). with load short protection.C200H A Backplane I/O Mounting Bracket For 3 Slots C200H-ATT33.General Information
The C200HS-SLK12 SYSMAC LINK fiber-optic module connects the PLC to the SYSMAC
LINK fiber-optic token bus peer-to-peer communications network OMRON C200HW-PD106R C200HW-PD106R An external power supply option provides direct pass-through communications in case of modulModel: C200H-MD215.
No. of I/O pts: 16 inputs, 16 outputs.
Specifications: 24VDC.Model: C200HW-BI051.
No. of I/O slots: 5 slots.Model: C200H-ME432.
Description: EEPROM, 4K words, battery back-up.with clock(CPU21, CPU23 only) OMRON C200HW-PD106R. Model: C200H-IA122V.
No. of inputs: 16 pts.
Input voltage: 100 to 120 VAC, +10%/–15%.
Input current: 10mA, 100VAC.
Isolation: Photo-coupler.
Indica-tor: LED.
External connec-tions: Remove-able termi-nal blocks.
Inputs percom-mon: 16 pts.
Internal currentcon-sump-tiC200HW Backplane PLATE ALPHA CPU ADAPTOR C200HW-AB001Name: SYSMAC LINK Fiber-optic Power Supply.
Model: C200H-APS01.Model: C200H-ID215 OMRON C200HW-PD106R.
No. of inputs: 32 pts.
Specifications: 24VDC.Model: C200H-B7A21.
I/O points: 16 output points and 16 input points or 15 input points + 1 error
input.
Weight: 300g max.Model: C200H-AD003.
Input points: 8 C200HW-PD106R OMRON.
Voltage input: 1 to 5 V, 0 to 10 V, or –10 to 10 V.
Current input: 4 to 20 mA.Model: C200H-OD411.
No. of points: 8 pts.
Specifications: 1A, 12 to 48 VDC.UM: 31 C200HW-PD106R OMRON. 2K words.
DM: 6K words.
EM: 6Kx3 banks(18K) words.
Instruction processing time (basic instructions): 0.1 µ.s min.
No. of I/O points: 1, 184 points.
Max. no.of con-necting Expansion I/O Racks: 3 Racks.
Max. no. of connecting High-density I/O Units(i.e., Group-2): Unavailable.
Max. no. of con-necting Special I/O Units: 10 C200HW-PD106R OMRON.
RS-232C: NO.Name: PID Control Module.
Moddel: C200H-PID01 C200HW-PD106R.
Output: Transistor output (open collector).Capacity: 16K word.
Access time: 150ns.
When using SYSMAC-CPT, can not be written in EPROM.
To write a program to the EPROM, use the standard PROM writer.
Before the EPPPROM memory card into the CPU, to connect the EPROM to the EPROM memory card OMRON C200HW-PD106R.
If you remove the EPROM memory card from the CPU,
Will not lose its data.
...More relevant models >>>>
Last one: 
next one: Related download