CA5-PFSALL/EX-01 Proface PROFIBUS-DP slave station module

7.4 inches, installed to provide the function of dust and moistureTouch panel operation for RGB input modules (Master - from: Mini-B)The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail.For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters CA5-PFSALL/EX-01 Proface CA5-PFSALL/EX-01 Use external output for the GP3000 series of auxiliary connectors (5 / sets).COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceExpansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)Used to install the GP3000H series to a commercially available support arm or panel CA5-PFSALL/EX-01 Proface. 10.4 inches (TFT), replace the backlight (2 / set)256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.Used to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interface) CA5-PFSALL/EX-01 Proface. The main controller is connected to the man-machine interface for MPI communicationStandard cable for connecting GP3000H adapter and GP3000H.
Length: 3 meters. Touch screen anti ultraviolet protective film (1 pieces).When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)The three color tower lamp installed on the fixed panel is connected with the human machine interface through the USB interface.Extension cable for connecting USB (Mini-B) interface to front panel CA5-PFSALL/EX-01. Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.12 way 4 digital signals into analog signals and output resultsUsed to connect the GP20000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors CA5-PFSALL/EX-01.
Length: 10 meters. Connector for connecting DC power cord. (linear, 5 / set)