Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master station
With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set).USB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set).Backup battery for time and data backup (1).A connector that connects the DIO interface for connecting an external I/O device (5 sets) Proface CA6-DNSALL/EX-01. 3.4 Inch Touch Screen anti UV protective film (1 pieces)
CA6-DNSALL/EX-01When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)10.4 inches (STN), the replacement of the host backlight (2 / set) Proface CA6-DNSALL/EX-01. COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)Touch screen anti ultraviolet protective film (1 pieces).For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)Used to prevent disconnection Proface CA6-DNSALL/EX-01. (1 interface, 5 / set)The nut for mounting the display module (10 / set).LT fasteners installed on the control panel (4 / set)A veneer, for the GP4000 series back loading models of full flush (white, 1)Touch screen anti ultraviolet protective film (1 pieces) CA6-DNSALL/EX-01 Proface. I/O module, including 32 point NPN/PNP input10 CA6-DNSALL/EX-01 Proface. 4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).For the direct connection of the MITSUUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters CA6-DNSALL/EX-01. Standard cable for connecting GP3000H adapter and GP3000H CA6-DNSALL/EX-01 Proface.
Length: 5 meters. 7.0/7.5 inch screen protectivve cover (1 pieces)12 Proface CA6-DNSALL/EX-01. 1 inch screen protective cover (1 pieces)Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable. (5 / set)