CA8-CFCALL/2GB-01 Proface CF card

1-0 DVI standard (DVI-D 24 pin convex connector)Converting 4 analog signals into digital signalsWhen the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)GP3000H replacement label (5 sheets / set)Connect to PC, transfer screen data and user programs CA8-CFCALL/2GB-01 Proface. 1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card CA8-CFCALL/2GB-01Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interface12.1 inches, replace the backlight (1 / set)Touch screen anti ultraviolet protective film (1 pieces).For 5.7 inch models, connect the connector to the DIO interface CA8-CFCALL/2GB-01 Proface. For connecting external I/O devices. (5 / set)Touch screen anti ultraviolet protective film (1 pieces).Clock battery, save system date and time when power is off.For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.Length: 3 metersPortable GP2000H series models accessories, RS-422 single head cable (3 m) CA8-CFCALL/2GB-01 Proface. A veneer, for the GP4000 series back loading models of full flush (white, 1)Touch screen anti ultraviolet protective film (1 pieces).The man-machine interface directly connected MITSUBISHI electric PLC Q series CPU programming port.Cable for connecting GP3000 to various modulesUsed to install the human machine interface to the fixed panel (2 / cover).Replaceable anti fouling film for protecting screen protective film (5 sheets / cover).Standard cable for connecting GP3000H adapter and GP3000H.
Length: 3 meters. The main controller is connectted to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module CA8-CFCALL/2GB-01. Data transmission cable between host and LT series. Length: 5 meters.15 inches, replaced by a host of backlight (1).GP2500S useConnect to PC, transfer screen data and user programs CA8-CFCALL/2GB-01. One end is a loose wire, which is used to carry out RS-485 connection between the host and LT.