CA3-DFS12-01 | Proface CA3-DFS12-01 Screen protection film

Touch panel operation for RGB input modules (Master - from: Mini-B)Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Adapter for converting an audio output portion of a AUX adapter into a Jack Pin socket.Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter Proface CA3-DFS12-01.
Length of 3 meters CA3-DFS12-01 USB interface products: without the base of the tower lights, 3 sections, can be changed color and flashing display, the configuration of the buzzer.Connector for connecting DC power cord. (right angle, 5 / set)Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters).2 / setsThe installation of accessories, adjust the size of the GP-411xT panel with the same size of the GP-410xG/W, easy to replace Proface CA3-DFS12-01. The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port.To prevent the connection of disconnected USB cable fastening clips (Mini-B USB, 1 interface, 5 / set)10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function Proface CA3-DFS12-01. Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable. (5 / set)Portable GP2000H series models accessories, RS-422 single head cable (10 m).For the operation screen (5 pieces) (GP3000H standard) CA3-DFS12-01 Proface. For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters CA3-DFS12-01 Proface. For 5.7 inch models, prevent cable loose from the USB cable fastening clip (5 / set).When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).Used to connect the 2-Port adapter to GP4000The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail CA3-DFS12-01 Proface CA3-DFS12-01. Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 poinnt PNP transistor outputThe three color tower lamp installed on the fixed panel is connected with the human machine interface through the USB interface Proface CA3-DFS12-01.