CA8-USBATALL-01 USB cable fastener (1 interface) Proface CA8-USBATALL-01

Used to output the image signal from the host computer to GPConverting 4 analog signals into digital signalsFor thin film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface CA8-USBATALL-01. (1)The Video-Mix module (262000 color video input, 4 channel x, DVI input DVI output x 1 channel, 1 channel x, VGA/SVGA/XGA) *1Touch screen anti ultraviolet protective film (1 pieces) CA8-USBATALL-01The man-machine interface directly connected MITSUBISHI electric PLC Q series CPU programming port.Engineering documents created by the LT interface to download images and logic programming software through the USB interface Proface CA8-USBATALL-01. For RGB input USB cable to prevent disconnection (2 / set)Touch screen anti ultraviolet protective film (1 pieces).For the operation screen (5 pieces) (GP3000H standard).COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceProvide dust proof and moisture proof function when installing GP3000H conversion adapter to hard panel Proface CA8-USBATALL-01. Backup battery for time and data backup (1).5.7 inch screen protective cover (1 pieces)Adapter for EX module (5 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface7 CA8-USBATALL-01 Proface. 5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets).10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function CA8-USBATALL-01 Proface. 512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.For the direct connection of the MITSUBIISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters CA8-USBATALL-01 Proface CA8-USBATALL-01. COM2 terminal adapter for communication through the RS-422/485 connectionExpansion module for the GP3000 accesss to the PROFIBUS network and DP PROFIBUS master communicationFitting on NETWORK FLEX interface Proface CA8-USBATALL-01. Connecting NETWORK FLEX communication cable. (5 / set)