CA9-USBAMB/5M-01 Proface RGB input module dedicated USB cable (5 m)

The host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication.Portable GP2000H series models accessories, RS-422 single head cable (10 m).SD memory card (4GB, MLC, CLASS4).Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) CA9-USBAMB/5M-01 Proface. 10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10 CA9-USBAMB/5M-014 inch GP2500 (TFT) in the installation of the required accessories.7.0/7.5 inch screen protective cover (1 pieces)Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationFor connecting GP operation data with D-Sub RS-232C and power /DIO terminals CA9-USBAMB/5M-01 Proface. 12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function.Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)Disposable supplies used to protect the screen from the pollution of the man-machine interface film (5 sheets / sets)The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port CA9-USBAMB/5M-01 Proface. Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.Clock battery, save system date and time when power is off.Apply to GLC-2600/250015 inches, replaced by a host of backlight (1).Used to install the man-machine interface to the fixed panel. (4 / set)10.4 inches (TFT), replace the backlight (2 / set)Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistorr PNP output CA9-USBAMB/5M-01. Up to 7 EX modules can be connected.USB interface products: without the base of the tower lights, 3 sections, can be changed color and flashing display, the configuration of the buzzer.5 / setsFor the elastic display mmodule installation nut wrench (1 / set) CA9-USBAMB/5M-01. For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)