Home
>> Products
>> OMRON
>> CQM1H/CQM1 PLC
>> CQM1 series CPU in board
>> CQM1H-AVB41 | OMRON CQM1H-AVB41 Analog Setting Board
CQM1H-AVB41 | OMRON CQM1H-AVB41 Analog Setting Board
Brand:
OMRON
Name: Analog Setting Board
Model: CQM1H-AVB41
Applicable CPU Units: CQM1H-CPU51/61.
Mounting locations and number of Boards: 1 Board can be mounted in either slot 1 or slot 2.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 60 g max.
...More relevant models >>>>
Name: Analog Setting Board
Model: CQM1H-AVB41
Applicable CPU Units: CQM1H-CPU51/61.
Mounting locations and number of Boards: 1 Board can be mounted in either slot 1 or slot 2.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 60 g max.
Number of inputs: 16 pts.
Input Voltage: 24V DC.
Input Current: 6 mA.Number of inputs: 32 pts.
Input Voltage: 24V DC.
Input Current: 6 mA.Peripheral port to RS-422 conversion cable (length: 0.2 m).Connects to the I/O module located on the extreme right.Specifications: Without clock (see below).Specification: 32 output points OMRON CQM1H-AVB41. Connects to right-hand side of CPU block.Specifications: 4 Kwords with clock CQM1H-AVB41Connecting I/O control module and interface module.
Cable length: 0.3 m.I/O points: 256 pts.
Program capacity(words): 3.2 K.
DM capacity (words): 3 K.
RS-232C port: YES.Communications protocol: Dedicated CompoBus/S protoco.
Code: Manchester code.Number of inputs: 32 pts.
Input Voltage: 24V DC OMRON CQM1H-AVB41.
Input Current: 4 mA.Required for Analog Input and Output Units: For one Analog Unit.Number of outputs: 8 pts.
Input Voltage: 250 VAC, 24 VAC.
Max Switching Current: 2 Amps.
Common Type: Independent.Applicable CPU Units: CQM1H-CPU51/61.
Connection location and number of Units: One Unit only.The Unit must be connected between the Power Supply Unit and the CPU Unit.
Dimensions: 25 × 110 × 107 mm (W × H × D) OMRON CQM1H-AVB41.
Weight: 170 g max.One of the following connection cables is required for ladder programming.Specification: Platinum resistance thermometer input (Pt100, JPt100),
manual operation,
ON/OFF or advanced PID control,
transistor (PNP) output, 4 loops CQM1H-AVB41 OMRON. I/O points: 256 pts.
Program capacity(words): 3.2 K.
DM capacity (words): 3 K.
RS-232C port: no.Number of inputs: 16 pts CQM1H-AVB41 OMRON.
Input Voltage: 12 V DC.
Input Current: 6 mA.I/O points: 128 pts.
Program capacity(words): 3.2 K.
DM capacity (words): 1 K.
RS-232C port: NO.Emergency stop unit: 2 inputs/2 outputs, 4 general-purpose inputs.Required for Analog Input and Output Unitss: For two Analog Units CQM1H-AVB41 OMRON CQM1H-AVB41. CQM1-LK Special I/O Unit I/O LINK MODULE SYSBUS CQM1LK501.Specifications: 8 Kwords with clock.Specifications: 16 Kwords with clock.Specifications: With clock (see below).Supply voltage: 1000 to 240 V AC, 50/60 Hz (wide range) OMRON CQM1H-AVB41.
Operating voltage range: 85 to 265 V AC.
Output capacity: 5 V DC: 6 A 24 V DC: 0.5 A(30 W total, see note).
Input Voltage: 24V DC.
Input Current: 6 mA.Number of inputs: 32 pts.
Input Voltage: 24V DC.
Input Current: 6 mA.Peripheral port to RS-422 conversion cable (length: 0.2 m).Connects to the I/O module located on the extreme right.Specifications: Without clock (see below).Specification: 32 output points OMRON CQM1H-AVB41. Connects to right-hand side of CPU block.Specifications: 4 Kwords with clock CQM1H-AVB41Connecting I/O control module and interface module.
Cable length: 0.3 m.I/O points: 256 pts.
Program capacity(words): 3.2 K.
DM capacity (words): 3 K.
RS-232C port: YES.Communications protocol: Dedicated CompoBus/S protoco.
Code: Manchester code.Number of inputs: 32 pts.
Input Voltage: 24V DC OMRON CQM1H-AVB41.
Input Current: 4 mA.Required for Analog Input and Output Units: For one Analog Unit.Number of outputs: 8 pts.
Input Voltage: 250 VAC, 24 VAC.
Max Switching Current: 2 Amps.
Common Type: Independent.Applicable CPU Units: CQM1H-CPU51/61.
Connection location and number of Units: One Unit only.The Unit must be connected between the Power Supply Unit and the CPU Unit.
Dimensions: 25 × 110 × 107 mm (W × H × D) OMRON CQM1H-AVB41.
Weight: 170 g max.One of the following connection cables is required for ladder programming.Specification: Platinum resistance thermometer input (Pt100, JPt100),
manual operation,
ON/OFF or advanced PID control,
transistor (PNP) output, 4 loops CQM1H-AVB41 OMRON. I/O points: 256 pts.
Program capacity(words): 3.2 K.
DM capacity (words): 3 K.
RS-232C port: no.Number of inputs: 16 pts CQM1H-AVB41 OMRON.
Input Voltage: 12 V DC.
Input Current: 6 mA.I/O points: 128 pts.
Program capacity(words): 3.2 K.
DM capacity (words): 1 K.
RS-232C port: NO.Emergency stop unit: 2 inputs/2 outputs, 4 general-purpose inputs.Required for Analog Input and Output Unitss: For two Analog Units CQM1H-AVB41 OMRON CQM1H-AVB41. CQM1-LK Special I/O Unit I/O LINK MODULE SYSBUS CQM1LK501.Specifications: 8 Kwords with clock.Specifications: 16 Kwords with clock.Specifications: With clock (see below).Supply voltage: 1000 to 240 V AC, 50/60 Hz (wide range) OMRON CQM1H-AVB41.
Operating voltage range: 85 to 265 V AC.
Output capacity: 5 V DC: 6 A 24 V DC: 0.5 A(30 W total, see note).
...More relevant models >>>>
Last one: 
next one: Related download