CRT1B-OD02S-1 Bit Slave Units with e-CON Connectors OMRON CRT1B-OD02S-1

OMRON Bit Slave Units with e-CON ConnectorsCRT1B-OD02S-1

CRT1B-OD02S-1 Introduce | CRT1B-OD02S-1 Catalog / Manual / Instructions / Software download

Brand: OMRON
Name: Bit Slave Units with e-CON Connectors
Model: CRT1B-OD02S-1
Name: Bit Slave Units with e-CON Connectors.
Specifications: Outputs; 2 outputs; PNP.
Simple and Intelligent Bit Slaves,
with Industry-standard e-CON connectors.
Slave Units capable of 2-point bit-level distribution.
The I/O power supply is supplied from the communications,
power in the previously connected flat cable, and has a,
short-circuit detection function for protection.
Industry-standard e-CON connectors.
Short-circuit protection safeguards the network,
from I/O short circuits.
Simple communications connections,
with flat cable and connectors.
Bit-level distribution to support,
essentially any application.

Name: Expansion Units MIL Connector type.
Specifications:Digital outputs; 16 outputs; NPN;
One Expansion Unit can be mounted to one,
CRT1-VAD02@@D or CRT1-VDA02@@D Analog I/O Slave Unit.
Standards: --.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet OMRON CRT1B-OD02S-1.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system CRT1B-OD02S-1
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error OMRON CRT1B-OD02S-1. Analog I/O terminal with screw terminal,
block for EtherCAT communicaitons.
The input/output range can be easily,
changed by the setting with the switch.
Detachable screw terminal block,
facilitates the maintenance.
Moving average calculation function.
Settings within the range of 100μs-64ms.
(For input only.)
Disconnection detection function.
(For input only and for usage with,
1-5V or 4-20mA ranges OMRON CRT1B-OD02S-1. )
Selectable node address setting methods:
setting with rotary,
switch and with tool software.
When setting the nodes with rotary switch,
setting is easy and node identification,
becomes possible for maintenance CRT1B-OD02S-1 OMRON. Power supply voltage: 24 VDC.
Connects to a Total Maximum of Eight,
Digital I/O, Analog I/O, and Relay Output,
Units Compatible with MULTIPLE I/O,
TERMINAL CRT1B-OD02S-1 OMRON.
Allows flexible combinations of I/O points.
Covering a total cable length of 3 m.
DIN track mounting. Name: Screw Terminal Block with SSR Outputs.
Specifications: Outputs;
8 outputs; SSR.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet CRT1B-OD02S-1 OMRON.
Branching is easily made with CompoNet.
Wiring material cost caan be reduced CRT1B-OD02S-1.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on sitee OMRON CRT1B-OD02S-1.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.

...More relevant models >>>>