Home
>> Products
>> MITSUBISHI
>> FX series PLC
>> FX all modules and accessories
>> FX2NC module
>> Connecting cable FX2NC-100MPCB MITSUBISHI FX2NC-100MPCB
Connecting cable FX2NC-100MPCB MITSUBISHI FX2NC-100MPCB
Brand:
MITSUBISHI
Name: Connecting cable
Model: FX2NC-100MPCB
Use: power cord for basic unit.
Length: 1.0m.
Auxiliary parts for FX3GC and FX3UC.
...More relevant models >>>>
Name: Connecting cable
Model: FX2NC-100MPCB
Use: power cord for basic unit.
Length: 1.0m.
Auxiliary parts for FX3GC and FX3UC.
Max input / output points: 16 points.
Supply voltage: 100 - 240VAC.
Input points: 8 points.
Output points: 8 points.
Output type: relay.
Power consumption: 30VA.
Weight (kg):0.6.
Size (WxHxD) mm:130x90x87.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time MITSUBISHI FX2NC-100MPCB FX2NC-100MPCB
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
Note recording function, Component annotation can be recorded in the program register.
Online program editor, online change the program will not lose the working hours or stop production operation MITSUBISHI FX2NC-100MPCB.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program. Special module for RS-232C communication.
This serial communication module, you can communicate with the computer, printer, code reader and other equipment with RS-232C communication function MITSUBISHI FX2NC-100MPCB.
The data can be transmitted through the buffer storage area of the module, and the data transfer between the PLC host and the module is realized FX2NC-100MPCB MITSUBISHI.
When you connect to FX3UC, you need FX2NC-CNV-IF or FX3UC-1PS-5V. Total input and output points: 48 points.
Input points: 24 points.
Output points: 24 points FX2NC-100MPCB MITSUBISHI.
Output type: relay output.
Power supply voltage: AC100-240V.
Input signal voltage: AC100V.
8K capacity of the RAM memory, the maximum can be extended to 16K.
CPU arithmetic processing speed of 0.08 S/ basic instructions.
On the right side of the FX2N series can be connected to the input and output expansion modules and special function modules FX2NC-100MPCB MITSUBISHI.
The basic unit is built in the 2 axis independent maximum 20kHz positioning function (transistor output type).
Quick disconnect the terminal block, which adopts excellent maintainability to quickly disconnect the terminal blocks, even if the cable is then replaced by the cable.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
Note recording function, Component annotation can be recorded in the program register.
OOnline program editor, online change the program will not lose the working hours or stop production operation FX2NC-100MPCB.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program MITSUBISHI FX2NC-100MPCB.
Supply voltage: 100 - 240VAC.
Input points: 8 points.
Output points: 8 points.
Output type: relay.
Power consumption: 30VA.
Weight (kg):0.6.
Size (WxHxD) mm:130x90x87.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time MITSUBISHI FX2NC-100MPCB FX2NC-100MPCB
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
Note recording function, Component annotation can be recorded in the program register.
Online program editor, online change the program will not lose the working hours or stop production operation MITSUBISHI FX2NC-100MPCB.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program. Special module for RS-232C communication.
This serial communication module, you can communicate with the computer, printer, code reader and other equipment with RS-232C communication function MITSUBISHI FX2NC-100MPCB.
The data can be transmitted through the buffer storage area of the module, and the data transfer between the PLC host and the module is realized FX2NC-100MPCB MITSUBISHI.
When you connect to FX3UC, you need FX2NC-CNV-IF or FX3UC-1PS-5V. Total input and output points: 48 points.
Input points: 24 points.
Output points: 24 points FX2NC-100MPCB MITSUBISHI.
Output type: relay output.
Power supply voltage: AC100-240V.
Input signal voltage: AC100V.
8K capacity of the RAM memory, the maximum can be extended to 16K.
CPU arithmetic processing speed of 0.08 S/ basic instructions.
On the right side of the FX2N series can be connected to the input and output expansion modules and special function modules FX2NC-100MPCB MITSUBISHI.
The basic unit is built in the 2 axis independent maximum 20kHz positioning function (transistor output type).
Quick disconnect the terminal block, which adopts excellent maintainability to quickly disconnect the terminal blocks, even if the cable is then replaced by the cable.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
Note recording function, Component annotation can be recorded in the program register.
OOnline program editor, online change the program will not lose the working hours or stop production operation FX2NC-100MPCB.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program MITSUBISHI FX2NC-100MPCB.
...More relevant models >>>>
Last one: MITSUBISHI High speed counter module FX2NC-1HC
next one: MITSUBISHI Connecting cable FX2NC-100BPCB
Related download