Home
>> Products
>> MITSUBISHI
>> FX series PLC
>> FX all modules and accessories
>> FX2NC module
>> FX2NC-32EX-DS Extension module MITSUBISHI FX2NC-32EX-DS
FX2NC-32EX-DS Extension module MITSUBISHI FX2NC-32EX-DS
Brand:
MITSUBISHI
Name: Extension module
Model: FX2NC-32EX-DS
Input points: 32 points.
Power supply: the basic unit to the expansion module to provide power.
Terminal type: connector type.
Weight: 0.2kg.
FX3GC, FX3UC can be directly connected to the input and output expansion equipment, to achieve a compact expansion.
Can choose 16 points, 32 points of the relay or transistor input and output models.
FX2NC-16E_-T-DS for terminal units can be disassembled models.
...More relevant models >>>>
Name: Extension module
Model: FX2NC-32EX-DS
Input points: 32 points.
Power supply: the basic unit to the expansion module to provide power.
Terminal type: connector type.
Weight: 0.2kg.
FX3GC, FX3UC can be directly connected to the input and output expansion equipment, to achieve a compact expansion.
Can choose 16 points, 32 points of the relay or transistor input and output models.
FX2NC-16E_-T-DS for terminal units can be disassembled models.
Extension board for connection with special adapters
(FX1S and FX1N host general). Output: 16 points.
Function: bidirectional thyristor output models.
Corresponding models: FX3GA, FX3G, FX3GE, FX3GC, FX3U, FX3UC.
Can carry on the FX3GC, the FX3UC basic unit and the expansion module or the localization module the connector and the terminal station transformation,
Save the time of the input and output connection, realize the labor saving MITSUBISHI FX2NC-32EX-DS FX2NC-32EX-DS
The use of built-in input and output components models,
Can receive AC100V input, or through the relay or the transistor to drive large capacity load. Cable flat cable;
Connector with 20 pin installed at both ends of the fuse.
Length 1.5M. Applicable models: FX2NC-20GM MITSUBISHI FX2NC-32EX-DS.
The contents of the RAM memory in FX2N-10GM, FX3UC, FX2N-20GM and FX3U are built up.
In addition, it is also required to use the backup relay and the data register and the time of the data register.
As FX3G, FX3GE, FX3GC with the option,
The use of soft components other than EEPROM. Output points: 8 points.
Output form: relay output.
Input signal voltage: DC24V.
FX2N series expansion unit
Expansion unit is an input and output expansion device with a built-in power supply MITSUBISHI FX2NC-32EX-DS.
As with the basic unit, the extension unit can be connected to a variety of input and output and special extension equipment.
Can connect to FX3GA/FX3G, FX3GE and FX3U FX2NC-32EX-DS MITSUBISHI.
AC power model, the built-in maximum DC24V 250mA/460mA supply power.
Because all models of FX series are built in high speed counter,
So the high speed control can be realized by the simple procedure FX2NC-32EX-DS MITSUBISHI.
The input of the basic unit is built in the anti jitter filter,
One part as digital filter,
Sensiitivity adjustment unit can reach 1ms FX2NC-32EX-DS.
Using high speed counter automatically adjusted to the minimum value.
Through the high cost of the built-in positioning function and the expansion function to increase the number of conntrol axis FX2NC-32EX-DS MITSUBISHI MITSUBISHI FX2NC-32EX-DS.
Extended function expansion board and special adapter,
Data links and communication with external serial devices.
(FX1S and FX1N host general). Output: 16 points.
Function: bidirectional thyristor output models.
Corresponding models: FX3GA, FX3G, FX3GE, FX3GC, FX3U, FX3UC.
Can carry on the FX3GC, the FX3UC basic unit and the expansion module or the localization module the connector and the terminal station transformation,
Save the time of the input and output connection, realize the labor saving MITSUBISHI FX2NC-32EX-DS FX2NC-32EX-DS
The use of built-in input and output components models,
Can receive AC100V input, or through the relay or the transistor to drive large capacity load. Cable flat cable;
Connector with 20 pin installed at both ends of the fuse.
Length 1.5M. Applicable models: FX2NC-20GM MITSUBISHI FX2NC-32EX-DS.
The contents of the RAM memory in FX2N-10GM, FX3UC, FX2N-20GM and FX3U are built up.
In addition, it is also required to use the backup relay and the data register and the time of the data register.
As FX3G, FX3GE, FX3GC with the option,
The use of soft components other than EEPROM. Output points: 8 points.
Output form: relay output.
Input signal voltage: DC24V.
FX2N series expansion unit
Expansion unit is an input and output expansion device with a built-in power supply MITSUBISHI FX2NC-32EX-DS.
As with the basic unit, the extension unit can be connected to a variety of input and output and special extension equipment.
Can connect to FX3GA/FX3G, FX3GE and FX3U FX2NC-32EX-DS MITSUBISHI.
AC power model, the built-in maximum DC24V 250mA/460mA supply power.
Because all models of FX series are built in high speed counter,
So the high speed control can be realized by the simple procedure FX2NC-32EX-DS MITSUBISHI.
The input of the basic unit is built in the anti jitter filter,
One part as digital filter,
Sensiitivity adjustment unit can reach 1ms FX2NC-32EX-DS.
Using high speed counter automatically adjusted to the minimum value.
Through the high cost of the built-in positioning function and the expansion function to increase the number of conntrol axis FX2NC-32EX-DS MITSUBISHI MITSUBISHI FX2NC-32EX-DS.
Extended function expansion board and special adapter,
Data links and communication with external serial devices.
...More relevant models >>>>
Last one: MITSUBISHI Extension module FX2NC-16EYT-DSS
next one: MITSUBISHI Extension module FX2NC-32EYT-DSS
Related download