Home
>> Products
>> MITSUBISHI
>> FX series PLC
>> FX all modules and accessories
>> FX1N module
>> FX1N-1DA-BD MITSUBISHI FX1N-1DA-BD
FX1N-1DA-BD MITSUBISHI FX1N-1DA-BD
Brand:
MITSUBISHI
Name: Analog output expansion board
Model: FX1N-1DA-BD
Analog output expansion board (1 channel).
Can be installed in FX1N, PLC FX1S, providing 1 channel analog input of the board.
Because it is embedded in the PLC installation, so do not need to install space.
Can easily control the speed of the inverter.
...More relevant models >>>>
Name: Analog output expansion board
Model: FX1N-1DA-BD
Analog output expansion board (1 channel).
Can be installed in FX1N, PLC FX1S, providing 1 channel analog input of the board.
Because it is embedded in the PLC installation, so do not need to install space.
Can easily control the speed of the inverter.
Max input / output points: 80 points.
Power supply voltage: 24VDC.
Input points: 40 points.
Output points: 40 points.
Output type: transistor.
Power consumption: 40W.
Weight (kg):1.2.
Size (WxHxD) mm:285x90x87.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard MITSUBISHI FX1N-1DA-BD.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time FX1N-1DA-BD
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
Note recording function, Component annotation can be recorded in the program register.
Since the FX2n series have the following features: the maximum range of inclusive of the standard features, program execution faster, the full complement of communication function, suitable for different countries in the world, and the power to meet a large number of special function modules of individual needs,
It can provide maximum flexibility and control capability for your factory automation applications MITSUBISHI FX1N-1DA-BD.
Control 16~256 point.
Built in 8K capacity of the RAM memory, the maximum can be extended to 16K MITSUBISHI FX1N-1DA-BD.
CPU arithmetic processing speed of 0.08 S/ basic instructions.
On the right side of the FX2N series can be connected to the input and output expansion modules and special function modules.
The basic unit is built in the 2 axis independent maximum 20kHz positioning function (transistor output type).
Quick disconnect the terminal block, which adopts excellent maintainability to quickly disconnect the terminal blocks, even if the cable is then replaced by the cable. Master station module for CC-Link.
FX2N-16CCL-M is the PLC CC-Link as the FX master module.
Up tto 7 remote I/O stations and 8 remote stations can be connected to the main station FX1N-1DA-BD.
Using the CC-LINK FX2N-32CCL interface, you can install PLC FX as CC-LINK remote device station to connect.
In addition, through the connection of varioous equipment manufacturers, can be applied to a variety of purposes of the system FX1N-1DA-BD.
The most suitable for production lines and other equipment control.
Power supply voltage: 24VDC.
Input points: 40 points.
Output points: 40 points.
Output type: transistor.
Power consumption: 40W.
Weight (kg):1.2.
Size (WxHxD) mm:285x90x87.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard MITSUBISHI FX1N-1DA-BD.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time FX1N-1DA-BD
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
Note recording function, Component annotation can be recorded in the program register.
Since the FX2n series have the following features: the maximum range of inclusive of the standard features, program execution faster, the full complement of communication function, suitable for different countries in the world, and the power to meet a large number of special function modules of individual needs,
It can provide maximum flexibility and control capability for your factory automation applications MITSUBISHI FX1N-1DA-BD.
Control 16~256 point.
Built in 8K capacity of the RAM memory, the maximum can be extended to 16K MITSUBISHI FX1N-1DA-BD.
CPU arithmetic processing speed of 0.08 S/ basic instructions.
On the right side of the FX2N series can be connected to the input and output expansion modules and special function modules.
The basic unit is built in the 2 axis independent maximum 20kHz positioning function (transistor output type).
Quick disconnect the terminal block, which adopts excellent maintainability to quickly disconnect the terminal blocks, even if the cable is then replaced by the cable. Master station module for CC-Link.
FX2N-16CCL-M is the PLC CC-Link as the FX master module.
Up tto 7 remote I/O stations and 8 remote stations can be connected to the main station FX1N-1DA-BD.
Using the CC-LINK FX2N-32CCL interface, you can install PLC FX as CC-LINK remote device station to connect.
In addition, through the connection of varioous equipment manufacturers, can be applied to a variety of purposes of the system FX1N-1DA-BD.
The most suitable for production lines and other equipment control.
...More relevant models >>>>
Last one: MITSUBISHI Analog input expansion board FX1N-2AD-BD
next one: MITSUBISHI Expansion board FX1N-CNV-BD
Related download