LK166
Home >> Products >> OMRON >> Security products >> Safety relay >> G7SA-5A1B | OMRON Relays with Forcibly Guided Contacts G7SA-5A1B

G7SA-5A1B | OMRON Relays with Forcibly Guided Contacts G7SA-5A1B

Brand: OMRON
Name: Relays with Forcibly Guided Contacts
Model: G7SA-5A1B
Type: Standard.
Sealing: Flux-tight.
Poles: 6 poles.
Contact configuration: 5PST-NO, SPST-NC.
Rated voltage: 12, 18, 21, 24, 48, 110 VDC.
Compact, Slim Relays Conforming to,
EN Standards.
Relays with forcibly guided contacts,
(EN50205 Class A, certified by VDE).
Supports the CE marking of machinery (Machinery Directive).
Helps avoid hazardous machine status when used as part of,
an interlocking circuit.
Four-pole and six-pole Relays are available.
The Relay’s terminal arrangement simplifies PWB pattern design.
Reinforced insulation between inputs and outputs.
Reinforced insulation between some poles of different polarity.

Number of beams: 92.
Protective height: 1,870mm.
Model: PNP.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO.
by reducing errors.
Simple wiring with only 4 wires.
Fast response time of 5 ms. Type: 1-Conduit.
Contact configuration: Slow-action; 1NC/1NO OMRON G7SA-5A1B.
Conduit opening/Connector: Pg13.5.
Multi-contact, Labor-saving,
Environment-friendly, Next,
generation Safety-door Switch G7SA-5A1B
Lineup includes three contact models with 2NC/1NO,
and 3NC contact forms and MBB models in addition,
to the previous contact forms 1NC/1NO, and 2NC.
M12-connector models are available, saving on,
labor and simplifying replacement.
Standardized gold-clad contacts provide high,
contact reliability OMRON G7SA-5A1B.
Applicable to both standard loads and microloads.
Variety of metallic heads available. Robust safety limit switch with metal housing.
Slow-action and snap-action contact with,
certified direct opening operation certification.
Direct opening mechanism (NC contacts only) added to,
enable opening contacts when faults occur, such as fused contacts OMRON G7SA-5A1B.
Safety of lever settings ensured using a mechanism that,
engages a gear between the operating position indicator plate and the lever.
Equipped with a mechanism that indicates the applicable,
operating zone, as well as push-button switching to control left and right motion G7SA-5A1B OMRON.
Head seal structure strengthened to improve seal properties.
(TÜV: IEC IP67, UL: NEMA 3, 4, 4X, 6P, and 13) G7SA-5A1B OMRON.
Wide standard operating temperature range: –40 to 80°C (standard type).
Certified standards: UL, CSA, EN (TÜV), and CCC.
Direction of Operation Key insertion: Horizontal.
Cable length: 1 m.
3NC (Sloow-action) G7SA-5A1B.
Slim Safety Door Switches with IP67 Rating.
Slim design with a width of only 17 mm G7SA-5A1B OMRON.
(three-contact models).
Reversible design allowing either front or rear mounting.
Built-in Switches with two- or thhree-terminal contact OMRON G7SA-5A1B.
construction are available.
Operation Key with rubber mounting hole to absorb vibration and shock.
IP67 degree of protection.


...More relevant models >>>>