GP3000H-CBLSD232-10M GP3000H soft belt joint type straight cable (RS-232C, D-Sub joint) Proface GP3000H-CBLSD232-10M

LT4000M (module type analog), PNP output, DC24V (host).The man-machine interface directly connected MITSUBISHI electric PLC Q series CPU programming port.5.7 inches, installed to provide the function of dust and moisture7.4 inches, installed to provide the function of dust and moistureStandard interface cable for connecting GP and external devices (such as the main controller), with a universal filter Proface GP3000H-CBLSD232-10M GP3000H-CBLSD232-10M
Length of 10 meters. CFast cards (32GB, SLC,) inserted in the CFast slot for storage.The main controller is connected to the man-machine interface for MPI communicationMounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Used to install the GP3000H series to a commercially available support arm or panel Proface GP3000H-CBLSD232-10M. Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.For multi connection communication, length: 5 meters.For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.12.1 inches, replaced by a host of backlight (1) Proface GP3000H-CBLSD232-10M. Clock battery, save system date and time when power is off.5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set) GP3000H-CBLSD232-10M Proface. COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface GP3000H-CBLSD232-10M Proface. Used in a variety of host and man-machine interface for RS-422 connectionFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.Foor 3 GP3000H-CBLSD232-10M. 8 inch models, connect the connector to the DIO interface GP3000H-CBLSD232-10M Proface. For connecting external I/O devices. (5 / set)COM2 adapter for converting the COM2 interface to the RS-422 terminal blockExtennsion cable for connecting USB (Mini-B) interface to front panel Proface GP3000H-CBLSD232-10M. Replaceable anti fouling film for protecting screen protective film (5 sheets / cover).