MITSUBISHI FX3SA-20MT-CM PLC
Brand:
MITSUBISHI
Name: PLC
Model: FX3SA-20MT-CM
Input and output points: 20 points.
Power supply: AC100-240V.
Input points: 12 points.
Output points: 8 points.
Output form: transistor output (drain).
Power consumption: 20W.
Weight: 0.4KG.
Outline dimension: 75x90x75mm.
A new application model.
FX3SA is a basic model on the basis of the basic performance of FX1S above the expansion of the expansion of the new model.
FX3SA is applicable to all kinds of fields of small scale equipment which need to simulate the quantity and function of MODBUS and Ethernet.
Basic models suitable for small scale control.
Compact but powerful,
At the same time, the analog quantity and communication function, etc..
...More relevant models >>>>
Name: PLC
Model: FX3SA-20MT-CM
Input and output points: 20 points.
Power supply: AC100-240V.
Input points: 12 points.
Output points: 8 points.
Output form: transistor output (drain).
Power consumption: 20W.
Weight: 0.4KG.
Outline dimension: 75x90x75mm.
A new application model.
FX3SA is a basic model on the basis of the basic performance of FX1S above the expansion of the expansion of the new model.
FX3SA is applicable to all kinds of fields of small scale equipment which need to simulate the quantity and function of MODBUS and Ethernet.
Basic models suitable for small scale control.
Compact but powerful,
At the same time, the analog quantity and communication function, etc..
Length: 1.5m.
Specification: TB-FX round cable. Memory format: EPROM.
Number of steps:
Can use up to 16000 steps.
Battery support: do not.
Method of writing and deleting: write and use ROM to write, use ultraviolet ray to delete. Power supply: 110mA DC5V (PLC internal power supply), 80mA DC24V (through the power connector by the external power supply) MITSUBISHI FX3SA-20MT-CM.
Analog input points: 4 points FX3SA-20MT-CM
Voltage input: DC-10~10V.
Current input: DC-20~20mA, 4~20mA.
Weight: 0.2kg.
Dimensions: 55 x 90 x 87.
Voltage input and current input of 4 channels can be carried out,
Each channel can be specified as a current input or voltage input.
Built in digital filter function and peak hold function, etc.,
Achieved a high speed of 500 AD S/ch conversion MITSUBISHI FX3SA-20MT-CM.
FX3UC-4AD can be connected to the FX3GC or FX3UC series. Function extension board for RS-422 communication.
DC5V power consumption: 20mA. Total input and output points: 48 points.
Input points: 24 points.
Output points: 24 points.
Output type: transistor output.
Power supply voltage: AC100-240V.
Input signal voltage: DC24V.
Developed a range of special function modules to meet the needs of different - analog I/O, high speed counter MITSUBISHI FX3SA-20MT-CM.
Positioning control to achieve the 16 axis, the pulse train output or for the J and K type thermocouple or Pt sensor developed the temperature module.
A total of 8 special function modules can be configured for each FX2n main unit.
Taking into account space saving and processing speed.
Connector input and output type compact high performance universal machine.
Compact, scalable input / output.
Can connect analog quantity, communication, positioning, etc..
Rich special extension equipment for FX2N.
By connecting the compact FX2rvc series with the input and output expansion module.
The input and output can be extended to 256 points.
Built in 8000 step RAM memory.
By installing the memory card box, the maximum can be extended to the 16000 step.
Overseas oriented products meet all kinds of international standards.
Use terminal module to replace connector connection or relay terminal row connection,
So as to save the wiring inside the cabinet.
Customers can according to their own needs, free choice of MITSUBISHI motor micro programmable controller FX series.
FX series can be widely used to control a variety of varied areas FX3SA-20MT-CM.
More convenient.
You can shorten the working hours of the development process by a minimal set of settings.
High reliability.
Excellent features, as always, quality and reliability. FX3SA-20MT-CM.
MITSUBISHI motor to recommend the third generation of micro programmable controller FX3 series.
High function, high precision, high cost performance.
Specification: TB-FX round cable. Memory format: EPROM.
Number of steps:
Can use up to 16000 steps.
Battery support: do not.
Method of writing and deleting: write and use ROM to write, use ultraviolet ray to delete. Power supply: 110mA DC5V (PLC internal power supply), 80mA DC24V (through the power connector by the external power supply) MITSUBISHI FX3SA-20MT-CM.
Analog input points: 4 points FX3SA-20MT-CM
Voltage input: DC-10~10V.
Current input: DC-20~20mA, 4~20mA.
Weight: 0.2kg.
Dimensions: 55 x 90 x 87.
Voltage input and current input of 4 channels can be carried out,
Each channel can be specified as a current input or voltage input.
Built in digital filter function and peak hold function, etc.,
Achieved a high speed of 500 AD S/ch conversion MITSUBISHI FX3SA-20MT-CM.
FX3UC-4AD can be connected to the FX3GC or FX3UC series. Function extension board for RS-422 communication.
DC5V power consumption: 20mA. Total input and output points: 48 points.
Input points: 24 points.
Output points: 24 points.
Output type: transistor output.
Power supply voltage: AC100-240V.
Input signal voltage: DC24V.
Developed a range of special function modules to meet the needs of different - analog I/O, high speed counter MITSUBISHI FX3SA-20MT-CM.
Positioning control to achieve the 16 axis, the pulse train output or for the J and K type thermocouple or Pt sensor developed the temperature module.
A total of 8 special function modules can be configured for each FX2n main unit.
Taking into account space saving and processing speed.
Connector input and output type compact high performance universal machine.
Compact, scalable input / output.
Can connect analog quantity, communication, positioning, etc..
Rich special extension equipment for FX2N.
By connecting the compact FX2rvc series with the input and output expansion module.
The input and output can be extended to 256 points.
Built in 8000 step RAM memory.
By installing the memory card box, the maximum can be extended to the 16000 step.
Overseas oriented products meet all kinds of international standards.
Use terminal module to replace connector connection or relay terminal row connection,
So as to save the wiring inside the cabinet.
Customers can according to their own needs, free choice of MITSUBISHI motor micro programmable controller FX series.
FX series can be widely used to control a variety of varied areas FX3SA-20MT-CM.
More convenient.
You can shorten the working hours of the development process by a minimal set of settings.
High reliability.
Excellent features, as always, quality and reliability. FX3SA-20MT-CM.
MITSUBISHI motor to recommend the third generation of micro programmable controller FX3 series.
High function, high precision, high cost performance.
...More relevant models >>>>
Last one: 
next one: Related download