LK166
Home >> Products >> Proface >> man-machine interface accessories >> MITSUBISHI Q series RS-232C PLC connection cable (5 m) CA3-CBLLNKMQ-01 Proface CA3-CBLLNKMQ-01

MITSUBISHI Q series RS-232C PLC connection cable (5 m) CA3-CBLLNKMQ-01 Proface CA3-CBLLNKMQ-01

Brand: Proface
Name: MITSUBISHI Q series RS-232C PLC connection cable (5 m)
Model: CA3-CBLLNKMQ-01
COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)

Touch panel operation for RGB input modules (Master - from: Mini-B)Cable for connecting GP3000 to various modulesTransmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block Proface CA3-CBLLNKMQ-01 CA3-CBLLNKMQ-01 Converting SIO to RS-422 terminal block12.1 inches, replaced by a host of backlight (1).Clock battery, save system date and time when power is off.Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output. Up to 7 EX modules can be connected Proface CA3-CBLLNKMQ-01. Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 5 meters. Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point NPN transistor outputUsed to prevent disconnection of the connection (1 interface, 5 / set) Proface CA3-CBLLNKMQ-01. GP3000H replacement label (5 sheets / set)For multi connection communication, length: 5 meters.Used for surface protection of man-machine interface from oil and chemical pollution (5 / set).Used to install the GP3000H series to a commercially available support arm or panel CA3-CBLLNKMQ-01 Proface. Connector for connecting a serial port (1)Suitable for A/B+ Type modelsAUX connector for external output (5 / set) CA3-CBLLNKMQ-01 Proface. The man-machine interface directly connected MITSUBISHI electric PLC Q series CPU programming port.When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)COM2 adapterr for converting the COM2 interface to the RS-422 terminal blockStandard interface cable for connecting GP and external devices (such as the main controller), with a universal filter CA3-CBLLNKMQ-01 Proface CA3-CBLLNKMQ-01.
Length of 3 meteers Proface CA3-CBLLNKMQ-01. With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set).


...More relevant models >>>>
Related download