MITSUBISHI 2-Port PLC adapter II cable (5 m) CA3-MDCB11 Proface CA3-MDCB11

Apply to GLC-2600/2500128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.13 pin input connectors for HTB and 16 pin output connectors. (1 / set)Converting 4 analog signals into digital signalsThe main controller is connected to the man-machine interface for MPI communicationSupport CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output Proface CA3-MDCB11 CA3-MDCB11 Up to 7 EX modules can be connected.10.4 inches or larger, when installed to provide the function of dust and moisture3.8 inches, GP installed to the hard panel to provide dust and moisture proof function Proface CA3-MDCB11. Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.USB interface products: without the base of the tower lights, 3 sections, can be changed color and flashing display, the configuration of the buzzer.USB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set).Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interface10 Proface CA3-MDCB11. 4 inch screen protective cover (1 pieces)The MITSUBISHI A series PLC is connected to GP, length: 5 m.A veneer, for the GP4000 series back loading models of full flush (white, 1)For 5 CA3-MDCB11 Proface. 7 inch models, prevent cable loose from the USB cable fastening clip (5 / set).OMRON SYSMAC series PLC or other main controller) connected to GP, length: 5 m CA3-MDCB11 Proface. Used to install the man-machine interface to the fixed panel. (4 / set)10.4 inches and above, used to connect the power cord (5 / set).Used for surface protection of man-machine interface from oil and chemical pollution (5 / set).Too prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression fllash memory card CA3-MDCB11 Proface Proface CA3-MDCB11 CA3-MDCB11. COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)