OMRON CQM1-ID212 DC Input Module

Connects to the I/O module located on the extreme right.Communications protocol: Dedicated CompoBus/S protoco.
Code: Manchester code.Number of outputs: 32 pts.
Max. switch-ing capacity: 16 mA at 4.5 V DC to 100 mA at 26.4 V.
External connector: Connector.
Weight: 180 g max.Required for Analog Input and Output Units: For one Analog Unit OMRON CQM1-ID212. I/O points: 128 pts.
Program capacity(words): 3 CQM1-ID2122 K.
DM capacity (words): 1 K.
RS-232C port: YES.I/O points: 256 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K.
RS-232C port: YES.
ABS interface: Yes.I/O points: 256 pts.
Program capacity(words): 7.2 K.
DM capacity (words): 6 K.
RS-232C port: YES.
Analog setting: YES.Specifications: 16 Kwords without clock OMRON CQM1-ID212. Number of outputs: 6 pts.
Max. switch-ing capacity: 0.4 A at 100 to 240 V AC.
External connector: Terminal block.
Weight: 240 g max.Expands G730 output capacity of G730 remote master ; adds 32 or 16 outputs, DIP switch selected.Number of analog inputs: 4 inputs.
Number of analog outputs: 2 outputs.
Input signal ranges: –10 to 10 V, 0 to 10 V, 0 to 5 V.
Output signal ranges: –10 to 10 V OMRON CQM1-ID212. Supply voltage: 24 V DC.
Operating voltage range: 20 to 28 V DC.
Output capacity: 30 W 5 V DC: 6 A.Number of outputs: 16 pts.
Input Voltage: 250 VAC, 24 VAC.
Max Switching Current: 2 Amps.
Common Type: Shared.Specifications: 4 Kwords without clock.Applicable CPU Units: CQM1H-CPU51/61.
Pulse inputs: 4 inputs.
External outputs: 4 outputS.
Current consumption (Supplied from Power Supply Unit): 5 V DC, 400 mA max.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 90 g max.
I/O points: 128 pts.
Program capacity(words): 3.2 K.
DM capacity (words): 1 K.
RS-232C port: NO.I/O points: 256 pts.
Program capacity(wordds): 7 CQM1-ID212. 2 K.
DM capacity (words): 6 K.
RS-232C port: YES.Specification: 16 input points, 16 output points.Expands G730 input capacity of G730 remote master;
adds 32 or 16 inputs,
DIP switch selected.Specification: Platinum resistancee thermometer input (Pt100, JPt100),
heater burnout alarm,
manual operation,
ON/OFF or advanced PID control,
transistor (NPN) output, 2 loops CQM1-ID212.