PFXZCBOP121 Proface PFXZCBOP121

12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function.5.7 inches, replace the backlight (1 / set)5.7 inch screen protective cover (1 pieces)7.5 inches, GP installed to the hard panel to provide dust and moisture proof function.Used in a variety of host and man-machine interface for RS-422 connectionConnector for connecting DC power cord Proface PFXZCBOP121 PFXZCBOP121 (right angle, 5 / set)The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail.CFast cards (32GB, SLC,) inserted in the CFast slot for storage.Used to output the image signal from the host computer to GPDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interface Proface PFXZCBOP121. Portable GP2000H series models accessories, RS-422 single head cable (3 m).OMRON SYSMAC series PLC or other main controller) connected to GP, length: 5 m.Connector for connecting DC power cord (5)10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function Proface PFXZCBOP121. Apply to GLC-2600/2500Portable GP2000H series models accessories, RS-232 single head cable (3 m).Used in a variety of host and man-machine interface for RS-232C connectionA veneer, for the GP4000 series back loading models of full flush (white, 1)To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)12 way 4 digital signals into analog signals and output results7.0/7.5 inch screen protective cover (1 pieces)2GB, for the implementation of the picture save, log and data backup and other data management operations, such as ccompression flash memory card PFXZCBOP121. 512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.Applicable to GLC-2600/2500, the need for bus converter (PSLL-CONV00) PFXZCBOP121. The MITSUBISHI Q series PLC is connected to GP, length: 5 m.Used for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave joint