PFXZCBDS61 | Proface PFXZCBDS61 5.7 inch screen protective film

For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters.Cable for connecting GP3000 to various modules7.4 inches, replace the backlight (1 / set)COM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connectorThe main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail Proface PFXZCBDS61 PFXZCBDS61 A veneer, for the GP4000 series back loading models of full flush (white, 1)Portable GP2000H series models accessories, RS-232 single head cable (10 m).Used to prevent accidental operation. Includes 3 mounting screws Proface PFXZCBDS61. Adapter for EX module (5 / set)LT seal on the control panel.When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)Suitable for A/B+ Type modelsTouch screen anti ultraviolet protective film (1 pieces).Direct interface Matsushita Electric PLC FP series CPU port.Converting 4 analog signals into digital signalsDurable interface cable for connecting GP with external devices (such as the main controller), equipped with a universal filter Proface PFXZCBDS61. GP3000H portable slingUsed to connect the 2-Port adapter to GP4000Standard cable for connecting GP3000H adapter and GP3000H PFXZCBDS61 Proface.
Length: 5 meters. Extension cable for connecting USB (Mini-B) interface to front panel.5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces) PFXZCBDS61 Proface. A1/A2/B+ DIO Type connector (welding type) (5 / set)LT4000M (module type DIO), PNNP output, DC24V (host) PFXZCBDS61 Proface PFXZCBDS61. Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable. (5 / set)One end is a loose wire, which is used to carry out RS-485 connection between the host and LT.12. Proface PFXZCBDS61. 1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).