PFXZCCEUSG1 EZ with light switch Proface PFXZCCEUSG1

A veneer, for the GP4000 series back loading models of full flush (white, 1)Used to connect the 2-Port adapter to GP4000A veneer, for the GP4000 series back loading models of full flush (white, 1)Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters Proface PFXZCCEUSG1. GP2500S useDisposable supplies used to protect the screen from the pollution of the man-machine interface film (5 sheets / sets)Suitable for GLC2300 seriesTouch screen anti ultraviolet protective film (1 pieces) PFXZCCEUSG1Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 3 meters. I/O module, including 32 point NPN/PNP inputCOM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionThe module is used for mounting on the back board of the GLC2000 series host computer Proface PFXZCCEUSG1. Then you can install the GP77R series or GLC100 series of medium size expansion module in the module on the outward side.7.4 inches, replace the backlight (1 / set)COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)GP-230/250/270 series is replaced by ST series, the gap filled with the opening of the panel10 Proface PFXZCCEUSG1. 4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) PFXZCCEUSG1 Proface. COM2 adapter for converting the COM2 interface to the RS-422 terminal blockThe man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port PFXZCCEUSG1 Proface. Length: 3 metersSupport CANopen from the station module, witth a 12 point digital input, 6 point relay output and 2 point transistor PNP output PFXZCCEUSG1. Up to 7 EX modules can be connected PFXZCCEUSG1 Proface. Portable GP2000H series models accessories, RS-232 single head cable (10 m).For thin film surface protectionn of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)For RGB input USB cable to prevent disconnection (2 / set)