LK166
Home >> Products >> Proface >> man-machine interface accessories >> ZC9USCLMB1 USB cable fastening clip (Mini-B) Proface ZC9USCLMB1

ZC9USCLMB1 USB cable fastening clip (Mini-B) Proface ZC9USCLMB1

Brand: Proface
Name: USB cable fastening clip (Mini-B)
Model: ZC9USCLMB1
Used to prevent disconnection of the connection (1 interface, 5 / set).

Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output. Up to 7 EX modules can be connected.LT seal on the control panel.Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (3 meters).For the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters Proface ZC9USCLMB1 ZC9USCLMB1 COM2 terminal adapter for communication through the RS-422/485 connection7.4 inches, replace the backlight (1 / set)Data transmission cable between host and LT series. Length: 5 meters.7.4 inches or larger, FLEX NETWORK GLC2300 connector (5 groups)For connecting GP operation data with RS-422 and power /DIO terminals Proface ZC9USCLMB1. For RGB input USB cable to prevent disconnection (2 / set)For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block.Used in a variety of host and man-machine interface for RS-232C connectionScreen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceExpansion module for the GP3000 access to the PROFIBUS network and DP PROFIBUS master communicationMemory for extending EX GP-Pro alarm and character table functions Proface ZC9USCLMB1 ZC9USCLMB1 Proface. The man-machine interface directly connected MITSUBISHI electric PLC Q series CPU programming port.Suitable for LT4000M/GP4000M series modules, 3.5 inch.Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter ZC9USCLMB1 Proface.
Length of 5 meters. COM 2 interface with the cable, for thee conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connectorUsed for surface protection of man-machine interface from oil and chemical pollution (5 / set) ZC9USCLMB1 Proface ZC9USCLMB1. A connector that connects the DIOO interface for connecting an external I/O device (5 sets) Proface ZC9USCLMB1. 12.1 inches, replaced by a host of backlight (1).12.1 inch screen protective cover (1 pieces)


...More relevant models >>>>