PFXZCDSCCFA321 Memory CFast card (32GB) Proface PFXZCDSCCFA321

12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function.For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block Proface PFXZCDSCCFA321. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function PFXZCDSCCFA321 (1)COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interface10.4 inches (TFT), replace the backlight (2 / set)The main controller is connected to the man-machine interface of the host, for MPI communicationThe main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module Proface PFXZCDSCCFA321. 7.4 inches, replace the backlight (1 / set)LT seal on the control panel.COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)The main controller is connected to the man-machine interface for MPI communication7.4 inches, installed to provide the function of dust and moistureWith the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models Proface PFXZCDSCCFA321. (2 / set)Suitable for GLC2300 seriesCOM1 interface with the cable for direct connection to the CPU series PLC QFor 3 PFXZCDSCCFA321 Proface. 8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)GP3000H replacement label (5 sheets / set)Portable GP2000H series models accessories, RS-422 single head cable (10 m) PFXZCDSCCFA321 Proface. Touch screen anti ultraviolet protective film (1 pieces).Expansion module for the GP3000 access too the CANopen network and communication with the CANopen master stationFor connecting GP operation data with D-Sub RS-232C and power /DIO terminals PFXZCDSCCFA321 Proface PFXZCDSCCFA321. 7.4 inches or larger, FLEX NETWORK GLC2300 connector ((5 groups)For the DVI input to GP300012 Proface PFXZCDSCCFA321. 1 inches, replaced by a host of backlight (1).USB cable to prevent disconnection of the fastening clip (5 / set)