The installation of accessories, adjust the size of the GP-411xT panel with the same size of the GP-410xG/W, easy to replace.
Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters. For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set).10.4 inches (TFT), replace the backlight (2 / set)COM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connectorFor multi connection communication, length: 5 meters Proface PFXZCFAD31
PFXZCFAD31 Used to install the GP3000H series to a commercially available support arm or panel.Durable interface cable for connecting GP with external devices (such as the main controller), equipped with a universal filter.5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) Proface PFXZCFAD31. The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.Used for surface protection of man-machine interface from oil and chemical pollution (5 / set).COM1 interface with the cable for direct connection to the CPU series PLC A4.3 Inch Touch Screen anti UV protective film (1 pieces) Proface PFXZCFAD31. Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor outputMounting screws (4 sets) to be fitted to the hard panel at the interface of the machine PFXZCFAD31 Proface. To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters PFFXZCFAD31 Proface PFXZCFAD31. COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)Colorful LED switch with USB interface PFXZCFAD31 Proface. Standard cable for connecting GP3000HH adapter and GP3000H Proface PFXZCFAD31.
Length: 3 meters. 7.4 inches or larger, for external reset input, NETWORK FLEX communication, audio output. AUX connector, L type