USB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set).
Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces).5 / sets5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card ZC9USCL1 Proface
ZC9USCL1 Touch screen anti ultraviolet protective film (1 pieces).Used to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interface).Adapter for EX module (5 / set)Apply to GLC-2600/2500For 3 ZC9USCL1 Proface. 8 inch models, prevent cable loose from the USB cable fastening clip (5 / set).The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port.15 inches, GP installed to the hard panel to provide dust and moisture proof function.Converting SIO to RS-422 terminal blockCable for connecting GP3000 to various modulesApplicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) ZC9USCL1 Proface. 10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function.3.8 inches, GP installed to the hard panel to provide dust and moisture proof function.Extended cable for connecting USB (Type-A) (LT) interface.4.3 Inch Touch Screen anti UV protective film (1 pieces).Input / output hybrid I/O modules, including 32 point NPN/PNP input and 32 point NPN transistor outputPortable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters).For tthe direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters ZC9USCL1. 7.5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets).The PC adapter for PCMCIA slot read CCF card required ZC9USCL1. Used to output the image signal from the host computer to GPPortable GP2000H series models accessories, RS-422 single head cable (3 m).