USB cable clamp for preventing disconnection of connection (5 / set)Adapter for EX module (5 / set)12 way 2 digital signals into analog signals and output resultsDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceExpansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)Length: 5 meters Proface FP-DV01-100
FP-DV01-100 Apply to GLC-2600/2500The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication.7.0/7.5 inch screen protective cover (1 pieces)10.4 inches and above, used to connect the power cord (5 / set) Proface FP-DV01-100. Cable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex).Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Connect to PC, transfer screen data and user programs.For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set).Direct interface Matsushita Electric PLC FP series CPU port Proface FP-DV01-100. COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionUsed to convert the USB interface to the serial interface (RS-232C). A modem or bar code reader that can be connected to support RS-232C.12.1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).USB cable to prevent disconnection of the fastening clip (5 / set)The guide rail mounting adapteer is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display FP-DV01-100. For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.Expansion module for the GP3000 acceess to the DeviceNet network and communication with the DeviceNet master stationLength: 3 metersDisposable battery (1 blocks) for backing up clock data FP-DV01-100.