Proface GP3000H-HS-01 Portable sling

10.4 inches or more, for the film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)LT fasteners installed on the control panel (4 / set)Protection for GP rear connectors (large and small for each of the 1).7.5 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) Proface GP3000H-HS-01 GP3000H-HS-01 For 5.7 inch models, for fixing the hooks of the three EX modules.Used to output the image signal from the host computer to GPFor 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Adapter for EX module (5 / set)7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes Proface GP3000H-HS-01. I/O expansion module, including the 8 point relay /1 public endUsed to convert the USB interface to the serial interface (RS-232C). A modem or bar code reader that can be connected to support RS-232C.Length: 3 meters128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Proface GP3000H-HS-01. Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 10 meters. 15 inches, replaced by a host of backlight (1).When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.Portable GP2000H series models accessories, RS-232 single head cable (10 m).12.1 inch /10.4 inch (STN), thin filmm for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) GP3000H-HS-01. Suitable for A/B+ Type modelsPortable GP2000H series models accessories, RS-422 single head cable (3 m).Support CANoppen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output GP3000H-HS-01. Up to 7 EX modules can be connected.