RS-422C 9 pin /25 pin conversion cable (20 cm) PFXZCBCBCVR41 Proface PFXZCBCBCVR41

Adapter for EX module (5 / set)USB cable clamp for preventing disconnection of connection (5 / set)Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceCOM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface PFXZCBCBCVR41 PFXZCBCBCVR41 (1)LT seal on the control panel.The installation of accessories, adjust the size of the GP-411xT panel with the same size of the GP-410xG/W, easy to replace.For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)15 inches, GP installed to the hard panel to provide dust and moisture proof function Proface PFXZCBCBCVR41. COM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connectorLT4000M (module type DIO), NPN output, DC24V (host).Touch screen anti ultraviolet protective film (1 pieces).When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface PFXZCBCBCVR41. (1)7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes PFXZCBCBCVR41 Proface. The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module PFXZCBCBCVR41 Proface. Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceProvide dust proof and moisture proof function when installing GP3000H conversion adapter to hard panel.For connecting GP operation dataa with D-Sub RS-232C and power /DIO terminals PFXZCBCBCVR41 Proface PFXZCBCBCVR41. B/B+/C FLEX NETWORK Type connector (5)For the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 55 meters Proface PFXZCBCBCVR41. COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)