CA7-DFS12-01 | Proface 12.1 inch screen protective film CA7-DFS12-01

5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)I/O expansion module, including the 8 point relay /1 public endAdapter for EX module (5 / set)10.4 inches (TFT), the replacement of the host backlight (1).GP3000H replacement label (5 sheets / set)Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) Proface CA7-DFS12-01 CA7-DFS12-01 Interface module for the simultaneous use of A/QnA/FX series external controllerCOM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connectorStandard interface cable for connecting GP and external devices (such as the main controller), with a universal filter Proface CA7-DFS12-01.
Length of 10 meters. 15 inches, replaced by a host of backlight (1).Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable. (5 / set)3.8 inches, GP installed to the hard panel to provide dust and moisture proof function.Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces) Proface CA7-DFS12-01. A1/A2/B+ DIO Type connector (compression type) (5 / set)Cable for connecting GP3000 to various modules7.5 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) CA7-DFS12-01 Proface. Use external output for the GP3000 series of auxiliary connectors (5 / sets).For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block CA7-DFS12-01 Proface. Standard cable foor connecting GP3000H adapter and GP3000H CA7-DFS12-01.
Length: 5 meters. Extension cable for connecting USB (Mini-B) interface to front panel CA7-DFS12-01 Proface. Length: 5 meters.12.1 inches, replace the backlight (1 / set)GP2500S useThe main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail Proface CA7-DFS12-01.