Home
>> Products
>> OMRON
>> Power/other peripheral devices
>> Power / equipment protection equipment
>> Protective equipment for equipment
>> Three-phase Voltage Relay K8AK-PW2 OMRON K8AK-PW2
Three-phase Voltage Relay K8AK-PW2 OMRON K8AK-PW2
Brand:
OMRON
Name: Three-phase Voltage Relay
Model: K8AK-PW2
Rated input: 3-phase 3-wire mode, 3-phase 4-wire mode;
380, 400, 415, 480 VAC, 220, 230, 240, 277 VAC.
Ideal for Monitoring 3-phase Power.
Supplies for Industrial Facilities and Equipment.
Greater resistance to inverter noise.
Monitor overvoltages and undervoltages for three-phase,
3-wire or 4-wire power supplies.
DIP switch setting for 3-phase 3-wire or 3-phase 4-wire,
power supply.
Two SPDT output relays, 5 A at 250 VAC (resistive load).
Separate outputs possible for overvoltages and,
undervoltages.
World-wide power specifications supported by one Unit,
(switchable using DIP switch).
Relay status can be monitored using LED indicator.
...More relevant models >>>>
Name: Three-phase Voltage Relay
Model: K8AK-PW2
Rated input: 3-phase 3-wire mode, 3-phase 4-wire mode;
380, 400, 415, 480 VAC, 220, 230, 240, 277 VAC.
Ideal for Monitoring 3-phase Power.
Supplies for Industrial Facilities and Equipment.
Greater resistance to inverter noise.
Monitor overvoltages and undervoltages for three-phase,
3-wire or 4-wire power supplies.
DIP switch setting for 3-phase 3-wire or 3-phase 4-wire,
power supply.
Two SPDT output relays, 5 A at 250 VAC (resistive load).
Separate outputs possible for overvoltages and,
undervoltages.
World-wide power specifications supported by one Unit,
(switchable using DIP switch).
Relay status can be monitored using LED indicator.
Mounted Connector: XG4A MIL Connectors.
No. of poles: 40.
Dimension A: 149.
Dimension B: 110.
Mounted Connector model: XG4A-4031.
Cable Connector model: XG4M-4030-T.
New Slim Connector-Terminal Block,
Conversion Units.
Mounting area reduced by 35% (in comparison with,
40-pole XW2B Units) to contribute to downsizing,
control panels and automatic equipment OMRON K8AK-PW2.
Fallout prevention for terminal screws K8AK-PW2
Round or forked crimp terminals can be used.
Mount to DIN Track or via screws.
Unique DIN Track lock can maintain open status,
during DIN Track attachment and removal.
Terminal cover can be locked open.
Screw terminals are arranged by color in groups,
of five to simplify counting terminal numbers OMRON K8AK-PW2. No. of cable cores: 4.
Cable connection direction: Right-angle (socket)/Straight (plug).
Cable length L: 5 m.
Small Round Water-resistive.
Connectors.
Water-resistive, compact connector meets IP67 requirements.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect with one touch.
Ideal for a wide variety of FA and OA applications OMRON K8AK-PW2.
Connectors on both cable ends require no harness work.
Some new M8 models with 3 or 5 poles. Appearance: insert type.
Control supply voltage: DC100/110V.
Action elements: overload detection.
Action characteristic: anti time limit action type K8AK-PW2 OMRON.
Especially suitable for single phase motor over current protection.
Can be used for motor overload protection, common single-phase circuit of the AC current detection K8AK-PW2 OMRON.
A variety of models, such as anti time limit characteristics, lock time, instantaneous action, etc., are provided,
The product is rich in variety, and can be effectively protected, detected and controlled according to the actual situation.
When the current is large, the input resistance of the CT or the relay part is not needed, and the use is simple K8AK-PW2 OMRON.
Because it is a plug-in, installation, disassembly, wiring and other operations are very simple. Appearance: insert type.
Control supply voltage: DC24V.
Action elements: overload detection.
Action characteristic: lock, instant action type.
Especially suitable for single phase motor over current protection.
Can be used for motor overload protection, common single-phase circuit of the AC current detection.
A variety of models, such as anti time limit characteristics, lock time, instantaneous action, etc K8AK-PW2. , are provided,
The product is rich in variety, and can be effectively protected, detected and controlled according to the actual situation.
When the current is large, the input resistance of the CT orr the relay part is not needed, and the use is simple OMRON K8AK-PW2.
Because it is a plug-in, installation, disassembly, wiring and other operations are very simple.
No. of poles: 40.
Dimension A: 149.
Dimension B: 110.
Mounted Connector model: XG4A-4031.
Cable Connector model: XG4M-4030-T.
New Slim Connector-Terminal Block,
Conversion Units.
Mounting area reduced by 35% (in comparison with,
40-pole XW2B Units) to contribute to downsizing,
control panels and automatic equipment OMRON K8AK-PW2.
Fallout prevention for terminal screws K8AK-PW2
Round or forked crimp terminals can be used.
Mount to DIN Track or via screws.
Unique DIN Track lock can maintain open status,
during DIN Track attachment and removal.
Terminal cover can be locked open.
Screw terminals are arranged by color in groups,
of five to simplify counting terminal numbers OMRON K8AK-PW2. No. of cable cores: 4.
Cable connection direction: Right-angle (socket)/Straight (plug).
Cable length L: 5 m.
Small Round Water-resistive.
Connectors.
Water-resistive, compact connector meets IP67 requirements.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect with one touch.
Ideal for a wide variety of FA and OA applications OMRON K8AK-PW2.
Connectors on both cable ends require no harness work.
Some new M8 models with 3 or 5 poles. Appearance: insert type.
Control supply voltage: DC100/110V.
Action elements: overload detection.
Action characteristic: anti time limit action type K8AK-PW2 OMRON.
Especially suitable for single phase motor over current protection.
Can be used for motor overload protection, common single-phase circuit of the AC current detection K8AK-PW2 OMRON.
A variety of models, such as anti time limit characteristics, lock time, instantaneous action, etc., are provided,
The product is rich in variety, and can be effectively protected, detected and controlled according to the actual situation.
When the current is large, the input resistance of the CT or the relay part is not needed, and the use is simple K8AK-PW2 OMRON.
Because it is a plug-in, installation, disassembly, wiring and other operations are very simple. Appearance: insert type.
Control supply voltage: DC24V.
Action elements: overload detection.
Action characteristic: lock, instant action type.
Especially suitable for single phase motor over current protection.
Can be used for motor overload protection, common single-phase circuit of the AC current detection.
A variety of models, such as anti time limit characteristics, lock time, instantaneous action, etc K8AK-PW2. , are provided,
The product is rich in variety, and can be effectively protected, detected and controlled according to the actual situation.
When the current is large, the input resistance of the CT orr the relay part is not needed, and the use is simple OMRON K8AK-PW2.
Because it is a plug-in, installation, disassembly, wiring and other operations are very simple.
...More relevant models >>>>
Last one: OMRON Three-phase Voltage Relay K8AK-PW1
next one: OMRON Three-phase Voltage and Phase-sequence Phase-loss Relay K8AK-PM Series
Related download