Home
>> Products
>> OMRON
>> Power/other peripheral devices
>> Data recorder
>> ZR-XRD1 | OMRON Data Logger ZR-XRD1
ZR-XRD1 | OMRON Data Logger ZR-XRD1
Brand:
OMRON
Name: Data Logger
Model: ZR-XRD1
Item: DC Cable (2 m).
Easy-to-use and Compact 10-Channel Logger,
with Internal 4 GB Flash Memory.
...More relevant models >>>>
Name: Data Logger
Model: ZR-XRD1
Item: DC Cable (2 m).
Easy-to-use and Compact 10-Channel Logger,
with Internal 4 GB Flash Memory.
Cable: With cable.
Connector: Connectors on both cable ends.
Cable length: 1 m.
Minimum order: 10.
Round Water-resistive Smartclick.
Connectors That Reduce Installation Work.
A newly developed lock mechanism that is compatible with round M12 connectors.
Simply insert the Connectors, then turn them approximately 1/8 of a turn to lock OMRON ZR-XRD1.
A positive click indicates locking.
Features the same degree of protection (IP67) as M12 connectors ZR-XRD1
A full line-up of models is planned.
Connectors with Cables are UL approved. Cable Specifications: Fire-retardant, Robot cable,
(E2E models with conventional connector pin).
Cable connection direction: L-shaped.
Cable diameter: 6.0 mm dia.
No. of cable cores: 2 OMRON ZR-XRD1.
Cable core cross sectional area: 0.5 mm.
Cable length: 2 m.
DC.
Minimum order: 5.
UL-listed: --.
Water- and Environment-resistive FA.
Connectors Save Wiring and Maintenance Effort.
Compact FA connectors meet IP67 requirements and ensure a,
94V-0 fire retardant rating.
A wide array of connectors makes a wiring system more modular,
simplifies maintenance, and reduces downtime OMRON ZR-XRD1.
Connectors with Cables and Connector Assemblies are available.
Three types of Connector Assembly: Crimping, soldering, and screw-on.
Connectors with Cables are UL certified.
Based on IEC61076-2-101 (IEC60947-5-2) and NECA 4202 ZR-XRD1 OMRON. Time specification: Instantaneous type.
Current setting range: 50 to 160 A.
Operating voltage: 400/440 VAC.
Resetting method: Automatic (See note ZR-XRD1 OMRON. ).
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button ZR-XRD1 OMRON.
The set time value can be checked easily because operation time,
is inddicated from the start of operation ZR-XRD1.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions OMRON ZR-XRD1. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.
Connector: Connectors on both cable ends.
Cable length: 1 m.
Minimum order: 10.
Round Water-resistive Smartclick.
Connectors That Reduce Installation Work.
A newly developed lock mechanism that is compatible with round M12 connectors.
Simply insert the Connectors, then turn them approximately 1/8 of a turn to lock OMRON ZR-XRD1.
A positive click indicates locking.
Features the same degree of protection (IP67) as M12 connectors ZR-XRD1
A full line-up of models is planned.
Connectors with Cables are UL approved. Cable Specifications: Fire-retardant, Robot cable,
(E2E models with conventional connector pin).
Cable connection direction: L-shaped.
Cable diameter: 6.0 mm dia.
No. of cable cores: 2 OMRON ZR-XRD1.
Cable core cross sectional area: 0.5 mm.
Cable length: 2 m.
DC.
Minimum order: 5.
UL-listed: --.
Water- and Environment-resistive FA.
Connectors Save Wiring and Maintenance Effort.
Compact FA connectors meet IP67 requirements and ensure a,
94V-0 fire retardant rating.
A wide array of connectors makes a wiring system more modular,
simplifies maintenance, and reduces downtime OMRON ZR-XRD1.
Connectors with Cables and Connector Assemblies are available.
Three types of Connector Assembly: Crimping, soldering, and screw-on.
Connectors with Cables are UL certified.
Based on IEC61076-2-101 (IEC60947-5-2) and NECA 4202 ZR-XRD1 OMRON. Time specification: Instantaneous type.
Current setting range: 50 to 160 A.
Operating voltage: 400/440 VAC.
Resetting method: Automatic (See note ZR-XRD1 OMRON. ).
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button ZR-XRD1 OMRON.
The set time value can be checked easily because operation time,
is inddicated from the start of operation ZR-XRD1.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions OMRON ZR-XRD1. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.
...More relevant models >>>>
Last one: 
next one: Related download