Home
>> Products
>> OMRON
>> Sensor
>> Displacement sensor/Length measuring sensor
>> displacement sensor
>> ZX-TDS10T | OMRON Smart Sensors ZX-TDS10T
ZX-TDS10T | OMRON Smart Sensors ZX-TDS10T
Brand:
OMRON
Name: Smart Sensors
Model: ZX-TDS10T
Size: 8 dia.
Type: Standard type.
Sensing distance: 10 mm.
Resolution (See note.): 0.4 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website.
...More relevant models >>>>
Name: Smart Sensors
Model: ZX-TDS10T
Size: 8 dia.
Type: Standard type.
Sensing distance: 10 mm.
Resolution (See note.): 0.4 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website.
Appearance: T-shaped.
Sensing method: Through-beam type (with slot).
Cable length: 2 m.
Sensing distance: 5 mm (slot width).
configuration Output: Dark-ON.
Indicator mode: Incident light.
Model: PNP output.
Slim, Compact Photomicrosensor.
that is still easy to use.
Compact, thin profile enables dense mounting OMRON ZX-TDS10T.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC ZX-TDS10T Size: M8, Shielded.
Sensing distance: 2.0 mm.
Connection: M8 connector (3-pin).
Body material: Stainless steel.
Thread length (overall length): 49 (61).
Output configuration: PNP.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1 OMRON ZX-TDS10T. 5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Size: M8(Stainless steel)(See note 2.); Single; Shielded.
Sensing distance: 1.5 mm.
Connecting method (See note 1.): M8 Connector (3-pin) OMRON ZX-TDS10T.
Body length: Long.
Output configuration: NPN.
Operation mode NO.
A new generation in global applications. Appearance: Shielded, M12.
Sensing distance: 4 mm.
Output: NPN.
Model: Operation mode NC.
Aluminum and Iron Both ZX-TDS10T OMRON.
Detectable from Long Distances. Power supply voltage: 5 to 12 VDC.
Output configuration: Line-driver output.
Resolution (pulses/rotation): 300, 360, 500, 600, 720, 800, 1,000, 1,024;
1,200, 1,500, 1,800, 2,000, 2,048; 2,500, 3,600 ZX-TDS10T OMRON.
Hollow-shaft Encoder.
Incremental model.
External diameter of 40 mm.
Resolution of up to 3,600 ppr.
Slim design at only 26 mm thick. Appearance: 3 dia.
Sensing distance: 2 mm.
Connecting method: M8 Pre-wired Connector Models (0 ZX-TDS10T OMRON. 3 m).
Cable specifications: PVC (oil-resistant).
Operation mode: NC.
Wire color /pin arrangement: 1: +V, 3: 0 V, 4: Control output.
Model: NPN output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available.
High-speed respoonse frequency stably detects moving,
objects: 5 kHz max ZX-TDS10T.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube againstt wire,
breakage is available (M4, M5 only) OMRON ZX-TDS10T.
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables.
Sensing method: Through-beam type (with slot).
Cable length: 2 m.
Sensing distance: 5 mm (slot width).
configuration Output: Dark-ON.
Indicator mode: Incident light.
Model: PNP output.
Slim, Compact Photomicrosensor.
that is still easy to use.
Compact, thin profile enables dense mounting OMRON ZX-TDS10T.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC ZX-TDS10T Size: M8, Shielded.
Sensing distance: 2.0 mm.
Connection: M8 connector (3-pin).
Body material: Stainless steel.
Thread length (overall length): 49 (61).
Output configuration: PNP.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1 OMRON ZX-TDS10T. 5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Size: M8(Stainless steel)(See note 2.); Single; Shielded.
Sensing distance: 1.5 mm.
Connecting method (See note 1.): M8 Connector (3-pin) OMRON ZX-TDS10T.
Body length: Long.
Output configuration: NPN.
Operation mode NO.
A new generation in global applications. Appearance: Shielded, M12.
Sensing distance: 4 mm.
Output: NPN.
Model: Operation mode NC.
Aluminum and Iron Both ZX-TDS10T OMRON.
Detectable from Long Distances. Power supply voltage: 5 to 12 VDC.
Output configuration: Line-driver output.
Resolution (pulses/rotation): 300, 360, 500, 600, 720, 800, 1,000, 1,024;
1,200, 1,500, 1,800, 2,000, 2,048; 2,500, 3,600 ZX-TDS10T OMRON.
Hollow-shaft Encoder.
Incremental model.
External diameter of 40 mm.
Resolution of up to 3,600 ppr.
Slim design at only 26 mm thick. Appearance: 3 dia.
Sensing distance: 2 mm.
Connecting method: M8 Pre-wired Connector Models (0 ZX-TDS10T OMRON. 3 m).
Cable specifications: PVC (oil-resistant).
Operation mode: NC.
Wire color /pin arrangement: 1: +V, 3: 0 V, 4: Control output.
Model: NPN output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available.
High-speed respoonse frequency stably detects moving,
objects: 5 kHz max ZX-TDS10T.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube againstt wire,
breakage is available (M4, M5 only) OMRON ZX-TDS10T.
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables.
...More relevant models >>>>
Last one: 
next one: Related download