Home
>> Products
>> OMRON
>> Sensor
>> Displacement sensor/Length measuring sensor
>> displacement sensor
>> ZX-TDS10T-V OMRON Smart Sensors
ZX-TDS10T-V OMRON Smart Sensors
Brand:
OMRON
Name: Smart Sensors
Model: ZX-TDS10T-V
Size: 8 dia.
Type: Air Lift Type.
Sensing distance: 10 mm.
Resolution (See note.): 0.4 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website.
...More relevant models >>>>
Name: Smart Sensors
Model: ZX-TDS10T-V
Size: 8 dia.
Type: Air Lift Type.
Sensing distance: 10 mm.
Resolution (See note.): 0.4 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website.
Sensor type: Through-beam.
Sensing distance: 15 m.
Connection method: M12 connector.
Model: PNP output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications ZX-TDS10T-V OMRON.
Non-stop detection.
High quality and reliability.
High EMC protection ZX-TDS10T-V
High light immunity.
Robust and waterproof housing. E32-T15ZR type: standard type; soft (new standard),
Specialty: plane shape side,
Shape / detection distance (mm): 270; 210; 130 (50),
Standard test object
(minimum test object) (mm) 1: 1 (0.005),
Fiber element for meeting diversified needsType: High-speed response models ZX-TDS10T-V OMRON.
Connecting method: Wire-saving connector *1.
Model: NPN output.
Applicable wire-saving connector(sold separately):
Type,Master connector, Slave connector; Model, E3X-CN21, E3X-CN22.
Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years ZX-TDS10T-V OMRON.
Power turning to easily set the optimum light level.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit. Sensing method: Through-beam type.
Sensing distance: 300 mm.
Output type: NPN output.
Output configuration: Light-ON.
CCable length: 2 m ZX-TDS10T-V.
Cable length from emitter to amplifier: 1 m.
Compact, Thin-profile.
Photomicrosensor with special amplifier.
Slim amplifier (50 × 7.5 × 12 mm) can be handled like a cable.
Provided with two operation indicators, eenabling monitoring from the,
amplifier housing and sensor head ZX-TDS10T-V.
Simple wiring with a 3-conductor cable.
Wide operating voltage range: 12 to 24 VDC.
Sensing distance: 15 m.
Connection method: M12 connector.
Model: PNP output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications ZX-TDS10T-V OMRON.
Non-stop detection.
High quality and reliability.
High EMC protection ZX-TDS10T-V
High light immunity.
Robust and waterproof housing. E32-T15ZR type: standard type; soft (new standard),
Specialty: plane shape side,
Shape / detection distance (mm): 270; 210; 130 (50),
Standard test object
(minimum test object) (mm) 1: 1 (0.005),
Fiber element for meeting diversified needsType: High-speed response models ZX-TDS10T-V OMRON.
Connecting method: Wire-saving connector *1.
Model: NPN output.
Applicable wire-saving connector(sold separately):
Type,Master connector, Slave connector; Model, E3X-CN21, E3X-CN22.
Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years ZX-TDS10T-V OMRON.
Power turning to easily set the optimum light level.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit. Sensing method: Through-beam type.
Sensing distance: 300 mm.
Output type: NPN output.
Output configuration: Light-ON.
CCable length: 2 m ZX-TDS10T-V.
Cable length from emitter to amplifier: 1 m.
Compact, Thin-profile.
Photomicrosensor with special amplifier.
Slim amplifier (50 × 7.5 × 12 mm) can be handled like a cable.
Provided with two operation indicators, eenabling monitoring from the,
amplifier housing and sensor head ZX-TDS10T-V.
Simple wiring with a 3-conductor cable.
Wide operating voltage range: 12 to 24 VDC.
...More relevant models >>>>
Last one: 
next one: Related download