OMRON GX-OD1621 PROGRAMMING MANUAL PDF

Cable /G79-Y_C with loose wire connecting terminal.
L size: 2000mm.
Cable and loose wire cable with loose wire pressing connecting terminal,
Connector cable, MITSUBISHI motor produced PLC connection cable GX-OD1621 PDF. Mounting type: W-bracket(see note).
Contact form: DPST-NO/DPST-NC.
Quick-connect terminals.
A High-capacity, High-dielectric-strength,
Multi-pole Relay Used Like a Contactor.
Miniature hinge for maximum switching power for motor loads,
as well as resistive and inductive loads GX-OD1621
No contact chattering for momentary voltage drops up to 50%,
of rated voltage.
Withstanding more than 4 kV between contacts that are differ,
ent in polarity and between the coil and contacts GX-OD1621 PDF.
Flame-resistant materials (UL94V-0-qualifying) used for all in,
sulation material.
Standard models approved by UL and CSA.
Insulation method: Phototriac.
Operation indicator: Yes.
Zero cross function: NO.
Applicable load: 2 A at 100 to 240 VAC GX-OD1621 PDF.
Input rated voltage: 5 to 24 VDC.
SSR with Plug-in Terminals.
The Same Shape as the G2R-1-S.
Power Relays.
These I/O solid state relays can be mounted in OMRON.
G70A I/O Terminals.
Lineup includes Input Modules for microloads and Output,
Modules for standard loads OMRON PROGRAMMING MANUAL.
Lineup also includes UL, CSA, and TÜV-certified models,
(-UTU models). Input capacity: 16 points.
Internal I/O common: PNP.
ON voltage: 15 VDC min.
(beetween each input terminal and the G terminal)
OFF voltage: 5 VDC max GX-OD1621 Manual.
(between each input terminal and the G terminal)
OFF current: 1 OMRON PROGRAMMING MANUAL. 0 mA max.
Input current: 6.0 mA max./input (at 24-VDC);
3.0 mA min./input (at 17-VDC).
ON delay: 0.1 ms max.
OFF delay: 0.2 ms max.
Input filter value: Without filter, 0.5 ms, 1 ms,
2 ms, 4 ms, 8 ms, 16 ms, 32 ms (Default setting: 1 ms).
Number of circuits per common: 16 inputs/common OMRON PROGRAMMING MANUAL.
Input indicators: LED display (yellow).
Isolation method: Photocoupler isolation.
I/O power supply method: Supply by I/O power supply.
Unit power supply current consumption: 90 mA max.
(for 20.4 to 26.4-VDC power supply voltage)
I/O power supply current con sumption: 5 mA max.
(for 20.4 to 26.4-VDC power supply voltage)
Weight: 180 g max.
Expansion functions: Enabled.
Short-circuit protection function: No.
High-speed digital I/O terminal with the,
screw type terminal block for EtherCAT,
communications.
Detachable screw terminal block facilitates,
the maintenance.
The expansion unit can be connected.
(One expansion uniit per one I/O terminal unit GX-OD1621 PROGRAMMING MANUAL. )
Input/output point can be flexibly increased,
depending on the system.
Input response time can be switched for,
high-speed processing.
Selectable node address setting methods:
setting with rotary sswitch and with tool software GX-OD1621 Manual.
When setting the nodes with rotary switch,
setting is easy and node identification becomes,
possible for maintenance.