OMRON D4SL-4KDG-D

Appearance: Knob-type Selector Switch A22W,
LED voltage-reduction lighting (without Voltage Reduction Unit).
Number of notches: 3 notches.
Resetting method: Automatic.
Output: SPST-NO.
Operating voltage: 100 VAC.
Illumination color: R (red); Y (yellow); G (green); A (blue).
Install in 22-dia. or 25-dia . Panel Cutout.
Lever for easily mounting and removing the Switch Unit D4SL-4KDG-D.
Finger protection mechanism on Switch Unit provided as a standard feature D4SL-4KDG-D
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type,
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models) D4SL-4KDG-D. Extremely Thin Relays Integrated with Heat Sinks .
Downsizing achieved through optimum design of heat sink.
Mounting possible via screws or via DIN track.
Close mounting possible for linking terminals.
(Except for G3PA-260B-VD and G3PA-450B-VD-2.)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Comply with VDE 0160 (finger protection),
with a dielectric strength of 4,000 V between input and load D4SL-4KDG-D.
Certified by UL, CSA, and VDE (reinforced insulation) . Appearance: Round/Full-guard type A22-G.
Output: SPST-NC.
Operation: Momentary operation (self-resetting).
Illumination color: R (red); Y (yellow); G (green);
W (white); A (blue); B (black).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(roundd-type) crimp terminals D4SL-4KDG-D.
IP65 oil resistance (non-lighted models) .
IP65 (lighted models). Appearance: Flat Unshielded.
Sensing distance: 10 mm.
Output configuration: DC 3-wire NPN.
Model/Operation mode: NC.
Flat Capacitive Sensor with a.
Thickness of Only 10 mm.
FFlaat Sensor with excellent space efficiency D4SL-4KDG-D.
(Model with built-in Amplifier is only 10 mm thick.)
Direct mounting onto a metallic surface is possible.
D4SL-4KDG-D Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=D4SL-4KDG-D&select=5