Home
>> Products
>> MITSUBISHI
>> L series PLC
>> I/O module
>> AC input module LX28-CM MITSUBISHI LX28-CM
AC input module LX28-CM MITSUBISHI LX28-CM
Brand:
MITSUBISHI
Name: AC input module
Model: LX28-CM
Input points: 8 points.
Rated input voltage: AC100 ~ 120V.
Common way: 8 point / public end.
Input / output occupied points: 16 points (I/O distribution: 16 points).
External wiring connection: 18 point terminal.
The input and output module is also called control module, which can output signal when there is control requirement,
Or provide a switch signal to the controlled device,
At the same time, the feedback signal of the equipment can be received to report to the host computer,
Is an important part of the fire alarm linkage system,
The input and output modules in the market can provide a pair of passive normally open / normally closed contacts,
For controlling the controlled equipment, the module of the part can be set by the parameters,
Set to active output, corresponding to the two input and output modules, multiple input and output modules, and so on.
...More relevant models >>>>
Name: AC input module
Model: LX28-CM
Input points: 8 points.
Rated input voltage: AC100 ~ 120V.
Common way: 8 point / public end.
Input / output occupied points: 16 points (I/O distribution: 16 points).
External wiring connection: 18 point terminal.
The input and output module is also called control module, which can output signal when there is control requirement,
Or provide a switch signal to the controlled device,
At the same time, the feedback signal of the equipment can be received to report to the host computer,
Is an important part of the fire alarm linkage system,
The input and output modules in the market can provide a pair of passive normally open / normally closed contacts,
For controlling the controlled equipment, the module of the part can be set by the parameters,
Set to active output, corresponding to the two input and output modules, multiple input and output modules, and so on.
Can be isolated to obtain DC24/48/100V, AC100/200V input signal.Can be used as a screw relay terminal.Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output.Convert connector to screw relay terminal.
The action of the signal of the conversion module is shown in the light of the lamp MITSUBISHI LX28-CM.
Negative common end with display. "Universal output function: source type LX28-CM
Program capacity: 260K step.
Basic operations processing speed: 9.5ns.
Communication interface: USB/Ethernet (built-in CC-Link function).
Program capacity: 20K step.
Control mode: stored procedure repeated operation.
Input / output points: 4096 points.
End cap.
High precision PWM control of the highest 200kHz MITSUBISHI LX28-CM.
In the PWM output mode, by setting the ON time and cycle time,
The duty cycle can be changed, and the minimum cycle time is 5 s.
In addition to lighting dimming control, simple motor control and heater control,
Can also be used to require high resolution detection equipment, such as a wide range of oscillators.
CPU built-in functions can be easily set through programming tools MITSUBISHI LX28-CM.
The built-in I/O function settings can be easily carried out through the parameters of the programming tool.
5 s units can be used for high precision workpiece measurement in pulse measurement mode,
Can be used with a minimum of 5 s units of the input signal of the ON/OFF time (the shortest 200 s) for high precision measurement LX28-CM MITSUBISHI.
For example, after measuring the ON time of the sensor input,
The "moving speed" and "length" of the workpiece can be accurately calculated " LX28-CM MITSUBISHI. "Can be isolated to obtain DC24/48/100V, AC100/200V input signal.Control axis: maximum 4 axes.
Operation cycle: 0.88ms.
Interpolation function: linear interpolation (maximum 4 axis), 2 axis arc interpolation LX28-CM MITSUBISHI.
Color signal: 4 points.
Color detecting set: 4 set.
Only need tto use the PLC program can easily achieve synchronous control, cam control, speed and torque (push pressure control) and other advanced motion control LX28-CM.
Equipped with standard synchronous encoder and color detection function necesssary function MITSUBISHI LX28-CM.
Can be no procedures for setting. Strong support for MELSOFT.
Can fully apply LD77MH of the old program.
Let motion control more simple.
The action of the signal of the conversion module is shown in the light of the lamp MITSUBISHI LX28-CM.
Negative common end with display. "Universal output function: source type LX28-CM
Program capacity: 260K step.
Basic operations processing speed: 9.5ns.
Communication interface: USB/Ethernet (built-in CC-Link function).
Program capacity: 20K step.
Control mode: stored procedure repeated operation.
Input / output points: 4096 points.
End cap.
High precision PWM control of the highest 200kHz MITSUBISHI LX28-CM.
In the PWM output mode, by setting the ON time and cycle time,
The duty cycle can be changed, and the minimum cycle time is 5 s.
In addition to lighting dimming control, simple motor control and heater control,
Can also be used to require high resolution detection equipment, such as a wide range of oscillators.
CPU built-in functions can be easily set through programming tools MITSUBISHI LX28-CM.
The built-in I/O function settings can be easily carried out through the parameters of the programming tool.
5 s units can be used for high precision workpiece measurement in pulse measurement mode,
Can be used with a minimum of 5 s units of the input signal of the ON/OFF time (the shortest 200 s) for high precision measurement LX28-CM MITSUBISHI.
For example, after measuring the ON time of the sensor input,
The "moving speed" and "length" of the workpiece can be accurately calculated " LX28-CM MITSUBISHI. "Can be isolated to obtain DC24/48/100V, AC100/200V input signal.Control axis: maximum 4 axes.
Operation cycle: 0.88ms.
Interpolation function: linear interpolation (maximum 4 axis), 2 axis arc interpolation LX28-CM MITSUBISHI.
Color signal: 4 points.
Color detecting set: 4 set.
Only need tto use the PLC program can easily achieve synchronous control, cam control, speed and torque (push pressure control) and other advanced motion control LX28-CM.
Equipped with standard synchronous encoder and color detection function necesssary function MITSUBISHI LX28-CM.
Can be no procedures for setting. Strong support for MELSOFT.
Can fully apply LD77MH of the old program.
Let motion control more simple.
...More relevant models >>>>
Last one: 
next one: Related download