CA8-ODP10-01 Proface CA8-ODP10-01

512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.5 / sets12 way 2 digital signals into analog signals and output resultsPortable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters) Proface CA8-ODP10-01. LT4000M (module type analog), PNP output, DC24V (host).7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes CA8-ODP10-01The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceUsed to connect the SIEMENS S5 PLC series to the host computer interface5 Proface CA8-ODP10-01. 7 inch screen protective cover (1 pieces)Used to prevent disconnection of the connection (1 interface, 5 / set).Colorful LED switch with USB interface.For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set).Used to install the GP3000H series to a commercially available support arm or panel Proface CA8-ODP10-01. USB cable fastening clip (Type-A) for preventing disconnection of connection (5 / set).A veneer, for the GP4000 series back loading models of full flush (white, 1)4.3 Inch Touch Screen anti UV protective film (1 pieces).Connector for connecting DC power cord. (right angle, 5 / set)OMRON SYSMAC series PLC or other main controller) connected to GP, length: 5 m.Input / output hybrid I/O modules, including 32 point NPN/PNP input and 32 point NPN transistor outputUsed to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meteers CA8-ODP10-01. For the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.Used to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interrface) CA8-ODP10-01. 10.4 inches or more, for the film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)